Connecting The Power Between Joined Panels - Chauvet pvp x3 User Manual

Connecting
the Power Between
Joined Panels
PVP X3 User Manual, Rev. 6
Power cable panel connections can also use different configurations. The basic
configuration to connect the main power supply from one panel to the next is:
1. The main power is connected to the first panel's Power Input or Output.
2. A power cable is then connected to the first panel's Power Output and connected to
the next panel's Power Input.
3. The connections continue until all panels are connected.
Connect power between the panels using the same procedure as the signal only using
the Power Input and Power Output connectors. You must adhere to the power-linking
specifications for each PVP X3 model.
Refer to the Power Linking
based on voltage from a single power connection.
Power linking more panels than recommended will void your warranty and
increase the risk of electrocution or fire!
Refer to the following diagram for an example of power connection from the main and to
each connected panel.
This example is using an PVP X3 power linking 7 panels horizontally @ 120 V.
section for details on the number of panels that can be linked
Connecting (Cabling) Each PVP
MAIN POWER IN
MAIN POWER IN
MAIN POWER IN
21