Remove And Install Front Caster Wheels - Kubota ZD1011 Operator's Manual

BRemove and Install Front Caster Wheels
C Removing
1. Park the machine on a firm and level surface.
2. Stop the engine and apply parking brake.
3. Lift the front of machine with a safe lifting device.
4. Remove the lock nut and the wheel bolt.
Then remove the nylon sleeve.
5. Remove the wheel from assembly yoke.
(1) Lock nut
(2) Wheel bolt
(3) Yoke
C Installing
1. Install the replacement wheel.
2. Install the nylon sleeve with the wheel bolt and the lock
nut.
3. Tighten the nut.
A Insert the wheel bolt from the outside of the yoke.
A Tighten the nut gradually until wheel bearing play is
eliminated and wheel turns freely by hand.
Reference
Tightening torque
4. Lower machine.
20 to 25 N-m
(14.8 to 18.4 lbf-ft)
(2 to 2.5 kgf-m)
TIRES AND WHEELS 33