Disconnecting The Charger; Access Codes - LG KP230 User Manual

KP230_NewZeland_080529
Disconnecting the
charger
Disconnect the charger from the
phone as shown in the diagram below.
Note
]
Ensure the battery is fully charged before
using the phone for the first time.
]
In the case the battery is not properly
charged, please turn the phone off and
on using the power key. Then detach and
reattach the battery, and recharge the
phone.
Turning your phone
on and off
Turning your phone on
1. Install a battery to the handset and
connect the phone to an external
power source such as the charger, or
2008.5.29 2:29 PM
cigarette lighter adapter. Or install a
charged battery pack to the
handset.
2. Press and hold
seconds until the LCD screen is
turned on.
3. Depending on the status of the PIN
code request setting you may need
to enter your PIN code.
Turning your phone off
1. Press and hold
seconds until the LCD screen is
turned off.

Access codes

You can use the access codes
described in this section to avoid
unauthorised use of your phone. The
access codes (except PUK and PUK2
codes) can be changed by using the
Change codes feature (Menu 9.1.5).
PIN code (4 to 8 digits)
The PIN (Personal Identification
Number) code protects your SIM card
Page 17
for a few
for a few
17