Gps Receiver - LG -E730 Service Manual

3. TECHNICAL BRIEF

3.4 GPS RECEIVER

The GPS(GNSS) path has its own antenna and receiver front-end circuit. In some applications, only a bandpass
filter and matching network is needed. This filter is similar to the filters used at the DRx inputs – a single-ended
input and differential output. The GPS(GNSS) input port has a differential configuration with a 100 nominal
impedance.
[Figure 3.4] GPS(GNSS) Circuit
LGE Internal Use Only - 31 - Copyright © 011 LG Electronics. Inc. All right reserved.
Only for training and service purposes