1. Manuals
  2. Brands
  3. KNIPEX Manuals
  4. Crimp tool
  5. eCrimp 97 43 E
  6. Operating instruction

KNIPEX eCrimp 97 43 E Operating Instruction

Hide thumbs
Table of Contents

Advertisement

Quick Links

Manual eCrimp (97 43 E)
Read these
Operating Instructions
before starting work!

Table of Contents

1.
2.
3.
4.
5.
6.
7.
tool
8.
9.
10.
11.
12.
2
2
3
3
4
4
5
7
10
12
12
12
rev.: 2013-08-29

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the eCrimp 97 43 E and is the answer not in the manual?

Questions and answers

Related Manuals for KNIPEX eCrimp 97 43 E

Summary of Contents for KNIPEX eCrimp 97 43 E

  • Page 1: Table Of Contents

    Brief description of the crimping tool First use and operation Cleaning, maintenance and repair Disposal Warranty EC Declaration of Conformity KNIPEX-Werk C. Gustav Putsch KG Oberkamper Strasse 13 42349 Wuppertal GErmaNy Read these Operating Instructions Tel.: +49 (0) 202 – 47 94-0 before starting work! Fax: +49 (0) 202 –...

  • Page 2: Intended Use

    The tools and the die sets must be used solely for the purpose as envisaged by KNIPEX. The tool is not intended for use in different or instructions! more specialised applications.

  • Page 3: Terminology Used

    XXXXX article no. 12V d.c. 240W year of manufacture Power consumption KNIPEX Quality – Made in Germany Explanation of possible rating plate icons used Certification mark, Canada and USA CE mark – product security in Europe Certification mark, Russia read the Operating manual Certification mark, Australia Rev.: 2013-08-29...

  • Page 4: Scope Of Delivery

    12 V DC battery, 1.5 ah Carrying case Information about other accessories – such as die sets, positioning guides (locators), wire stops, etc. – can be obtained online at www.knipex.de or from your dealer. 6. Technical specifications Rated voltage / battery 12 V DC (lithium-ion) / 1.5 Ah / 3.0 Ah...

  • Page 5: Brief Description Of The Crimping

    Manual eCrimp (97 43 E) 7. Brief description of the crimping tool Green LEd The LED (1) illuminates the working area. This LED lights up The LED lights up or flashes (reason see 8.2) when the crimping tool is ready for use. Allen key Green LEds an allen key (2) is required for changing the die sets.
  • Page 6 Manual eCrimp (97 43 E) 7.3 Battery The batteries are not charged at the factory. Accordingly: Charge the battery before first using the tool. Specific temperatures apply to charging performance and battery storage. Accordingly: Ensure you follow the charger’s operating manual. Removing the battery (Figure 2) Depress (1) both unlocking buttons (a) and then pull out the battery (2).

  • Page 7: First Use And Operation

    Manual eCrimp (97 43 E) 8 First use and operation Do not work with the crimping tool on life wires! always verify the workpiece is not energized. Finger crush hazard when operating the tool without crimping die sets. (Figure 4) The crimping tool is not intended as a substitute for a Figure 4 stationary crimping machine.
  • Page 8 Manual eCrimp (97 43 E) 8.1.2 Fitting die sets with additional positioning guides 8.1.2.1 Examples: non-insulated open plug connectors, d-sub plugs, etc. (Figure 7) a positioning guide can be used to position the connectors. For use AF 7 without a positioning guide, assemble as shown in Section 8.1.1. 1.
  • Page 9 Manual eCrimp (97 43 E) 8.2 LEd display meanings (see Figure 1) LEd display Status/cause Action No LEDs illuminated The tool is switched off. Press the Start button (see Section 7.4). Green LED (5) is illuminated The tool is ready for use. Green LED (5) not illuminated (jaws opening) The crimping tool is returning automatically to its starting position.

  • Page 10: Cleaning, Maintenance And Repair

    Enquiries about addresses for servicing and repair work outside performed at least once every 2 years or at the point D/A/CH can be optained from your KNIPEX dealer or directed to KNIPEX in time indicated by the LED display (see Section 8.2, at www.knipex.de or to rennsteig at www.rennsteig.com.
  • Page 11 Manual eCrimp (97 43 E) Cycles display within a service interval With the crimping tool switched off, you can check the number of cycles remaining before the next service by completing the steps as given below: Press and hold the reset button (8) (Fig.1). Then press and hold the Start button (7) (fig.1).

  • Page 12: Disposal

    12. EC declaration of Conformity the tool and its accessories can be returned to KNIPEX or a service centre. In accordance with EU directives 2004/108/EC; 2006/42/EC We hereby declare that the eCrimp (97 43 E) crimping tool conforms to 11.

Table of Contents