Preliminary Warnings - GBD FLOOR 830 Instructions For Installation Manual

FLOOR

6 - PRELIMINARY WARNINGS

• Check that the gate structure is adapted for installing the operator.
• Check for the fixed and mobile parts of the gate to be structurally intact and appropriate or whether require
reinforcement work.
• Check that the parts subject to friction, especially the top hinge, does not require any setup.
• In the working area there must be no obstacles of any kind.
• The foundation box must be laid in an area free from cables and pipes and such as to ensure a proper seal.
• Check the existence of an efficient earth.
• The installation should be done far away from any road, so as not to pose a threat to circulation.
• It is useful to signal the automatic entrance with warning plates of easy visibility (inside and outside) and, if
necessary, that warn pedestrians they are not allowed to pass through.
• If the installation presents some un-safety details, stop the work and contact your dealer.
• Check that the gate structure is strong enough. In any case the operator must push the gate at a reinforced
point.
• Check that the leaves can be moved manually without effort throughout the stroke.
• Check that the mechanical stop, both in opening and closing are correctly installed.
• If the automatic system is not a completely new installation, check the wear of all components and repair or
replace defective or worn parts.
• Reliability and safety are directly affected by the condition of the gate structure.
7 - DEFINITION OF LEFT-RIGHT WING AND MIDDLE INSTALLATION
The operator can be left or right and by convention is looking from the inside (opening direction) 7a .
The installation of the foundation box can be done on the center line of the passage (classic installation) 7b or
[ ]
in the passageway 7c .
It is necessary to provide the mechanical stop À [ ] [ ]
7b 7c .
19
UK
[ ]
[ ]