Page 1
Contents Getting Ready Basic operation Phone Setting global function Mail Internet Explorer People Messaging Camera Basic Manual Marketplace System settings Application settings Resetting your phone Appendix/Index...
• IS12T is a digital cell phone and can maintain a high call quality until the signal weakness reaches its limit. Therefore, once the limit has been reached, the call may be disconnected suddenly.
• Move to areas where you will not inconvenience others on ・ Start Here Guide (Japanese) ・ warranty (Japanese) ・ IS12T Setup Guide (Japanese) ・ User's Manual (Japanese) trains or in hotel lobbies. ・ Global Passport Owner's Guide (Japanese) • Refrain from talking in a loud voice.
1234 value Note on screenshots Functions to protect your privacy The screenshots in this manual are simplified and may look IS12T has the following functions to protect privacy of the different from the actual screens. stored data. Function Setting Setting password to For instructions, see "Restricting...
PIN code You can set IS12T to require PIN code entry every ◎ When the PIN code is locked, IS12T may be restarted for the time the power is turned on, to prevent unauthorized security reasons. use of the au IC card by a third party. If the PIN code is...
Start screen ....................... 15 Icons on the status bar .................. 16 Safety Precautions................ii Operations in common for each screen ........... 16 Before Using IS12T ................ii Adjusting volume ....................16 Cell Phone Etiquette ................1 Operations in common for applications ............ 17 Application list ....................
Page 7
Appendix ................49 Having the other person read your profile..........33 Troubleshooting ....................49 Reading the other person's profile to save ..........33 Rebooting your IS12T ..................51 Trademarks ......................51 Messaging ................34 Checking received short messages ............34 Index ..................
① Earphone jack Use to connect an earphone. An Getting Ready earphone acts as an antenna when using a radio. Earphone jack is waterproof. If it gets Names of parts and their functions wet, drain water. ② External Connect to microUSB-USB conversion connection jack cable.
GPS antenna. ◎ If the proximity sensor or the light sensor is covered during a call, the screen turns off. ◎ Covering or touching around the built-in antenna when holding IS12T with the fingers or metal substance may reduce signal reception.
• Before attaching/removing the battery pack and battery pack cover, turn the power off. • When you attach/remove the battery pack cover, hold IS12T in your hand so that you will not scratch the display etc. • Wipe off water before removing the battery pack cover.
• With on the battery pack facing up, align the Place your fingernail or a flat-blade contacts of the battery pack with that of IS12T and insert screwdriver into the battery cover removal the battery in the direction of the arrow.
Charging using AC adapter Charging (sold separately) When you purchase IS12T the battery pack is not fully The following describes how to charge the battery pack using charged. Be sure to charge the battery pack before use. the common AC adapter 03 (sold separately). (Note that your When the notification LED of IS12T flashes in orange, the AC adapter may be different from the illustration.)
Windows Live ID by any of the following steps. ◎ IS12T can also be charged by connecting it to a PC with • Access Windows Live ID website (http://mobile.live.com/) via A →...
■ Canceling sleep mode Attaching/Removing au IC card In sleep mode, C/A Before attaching/removing the au IC card, first turn IS12T The lock screen appears. off and remove the battery pack. ◎ You can change the idling time to go to sleep mode (screen ◎...
Page 15
When you set a PIN code, entering a PIN code is required Press the lock ① and pull the au IC card out when IS12T is activated. If you select "キャンセル (cancel)", 2-3 mm in the direction of the arrow ②...
Using touch panel is called double-tap. (▶P.17). The display of IS12T is a touch panel. You can operate IS12T by directly touching the screen. ■ Notes for using the touch panel The touch panel is designed for being touched lightly with fingers.
Switching between landscape and portrait view A motion sensor detects the orientation and movement of IS12T so that the screen switches depending on if IS12T is held vertically or horizontally. ◎ Operate IS12T in the vertical orientation. When IS12T is in...
Icons on the status bar Operations in common for each screen Status icons displayed at the top of the screen of IS12T tell you the current status. Adjusting volume Tap the top of the screen to display status icons. They become undisplayed a few seconds later.
■ Operating from context menu On the start screen, tap or flick to left to show the application list on IS12T. The context menu is a menu displayed by pressing and holding the screen or items which contain menu options. To hide the menu, tap a place other than menu.
Internet Access to the Internet. Explorer LinkCabinet Play contents such as pictures, music, ◎ In IS12T, there are preinstalled applications other than the ones video, etc. saved in IS12T with DLNA in the table. enabled player connecting to the network.
◎ There is not content or transmission charge for emergency earthquake information. ◎ KDDI is not liable for damages suffered by customers resulting from the service's information, lack or delay in the information caused by transmission or system breakdowns, or other events that are outside the responsibility of KDDI.
If a password is set, entering a password is from the screen displayed after required when unlocking screen. activating camera, tap to enter the password and unlock. ◎ You can lock IS12T by remote access from a PC in case IS12T is misplaced. For details, refer to "Help+How-to".
◎ It is recommended to note down the password. If you forget the on a conventional mobile password and cannot operate IS12T, you need to reset your phone. The display switches phone. in four input modes (Kana/ ◎...
Switching keyboard ④ Set/Enter key: Insert line feed at the cursor position. Set entered Press and hold "ENU" to select number keyboard or character when converting. QWERTY keyboard. ⑤ Input panel Display is changed by the character/number switch key. Entering text on the number keyboard There are 4 input modes (kana/alphabet/number, symbol/ emoticon, symbol, special character) for number keyboard.
Entering with sliding operation ⑤ Input panel Display is changed by the input mode switch key. Press and hold a key to which a character you want to enter is allocated to display input candidate. Slide to a character Operating cursor you want to enter.
Phone ◎ Tap a phone number or name from the histories to show the profile screen for People. You can make a call from the screen. Making calls Sending short messages is not supported and you cannot send a message even if you tap "SMS" to create a message. ◎...
Calling overseas (001 international call ◎ Voice mails or messages are indicated with icons in the start service) screen. You can make international calls from your IS12T without Checking your phone number any special procedure. Example: To call "212-123-XXXX" in the USA from your A→...
The PRL (Preferred roaming list) is information about necessary steps for suspending the use. overseas service providers with whom KDDI (au) has a ◎ If your au IC card is lost or stolen, it may be used improperly by inserting to another cell phone (including a global GSM cell contract for international roaming.
You can set a mail account usually used on a PC, etc. to Live IDs, additional accounts can be set. IS12T so that you can send and receive mails just like you ◎ In addition to the accounts mentioned above, Microsoft Exchange can on a PC.
◎ If you fail to sign in, follow the on-screen instructions to enter ◎ If you want to delete a file attached to the original mail when mail address and password again. forwarding, tap "remove" and tap "yes". ◎ "Attention required" appears when you failed to sign in even if ◎...
① Enter a contact or a mail address as destination. In conversations, Appears only when "Conversations" • Tap and tap a contact you want to send a show replies and is set to On. If marked, mails mail. email from all your you replied are also included to •...
→ →Flick to display You can use a browser to view web pages just as you can "applications"→"Internet Explorer" ® on a PC. IS12T can use Internet Explorer Mobile as a Set required items browser. Allow access to Set to On if you allow to read your my location location information.
"add photo"→Select an image→Adjust size People and layout→ You can also tap to shoot a photo and save it. "People" is an application which manages information of the persons to communicate such as phone numbers, mail addresses, Facebook accounts information, etc. If several accounts (Facebook, Google, etc.) are set, all contacts are shown in "People".
People ◎ You can delete one account at a time. Facebook account information cannot be deleted. In addition to the contacts created on IS12T, Facebook friends, etc. are automatically displayed as contacts in Grouping contacts "People". You can filter contacts out to display in "People".
Reading the other person's profile to save Exchanging profiles To exchange profiles, create a QR code including your profile information and have the other person read with the mobile phone, etc or read a QR code including the other ◎ QR codes which include information other than profile information (URL, advertising, etc.) cannot be read.
Received short message is displayed in the call-out. ◎ IS12T does not support emoji characters. ◎ IS12T cannot send a short message. If you create and send a message, "Can't send message" appears. A → You can tap →...
Set to On to shoot by tapping the take pictures screen. time heats IS12T up. In such case, an alarm sounds and Press and hold Set to On to wake your phone from the shooting video stops, and then you return to the start...
① View finder Check composition on shooting. Starting the camera Half-press D to focus on. A focus frame appears in the center. Start the camera by one of the following operations. When the focus is fixed, sound is • Press D. emitted.
D to stop shooting The video is automatically saved to camera roll. ◎ When "Tap screen to take pictures" is On, tap a point you want to focus. The camera automatically focuses on the point and shoot. For details, see "Setting the camera" (▶P.35). ◎...
Page 40
Option item Description Option item Description Scene Set according to shooting scene. Auto focus Select shooting scene using auto- Picture focus function from the following You can select from "Auto" (default settings. value)/"Standard"/"Night"/"Landscape"/ • "Standard" (default value): Use auto- "People"/"Backlight"/"Sports"/ focus function for usual shooting.
Operation Method Option item Description Turn picture to Hold IS12T vertically or Flash Set operations for light and flash. portrait view/ horizontally to switch portrait/ Picture landscape view landscape view. Light Select from the following settings. • : Light/Flash Auto (default value) share...
■ When "SET UP ACCOUNT" screen is displayed after even during the warranty period. tapping "install" etc. ◎ KDDI is not liable for any disadvantage brought to you or any third party due to an application you installed. Set "Date of birth"→...
Rating applications or games System settings A→ A→ "marketplace" is displayed. → Select an application or game you want to Select necessary items in the system rate settings A detailed information screen appears. Setting items and the content are as follows. Note that the table below shows settings at a time of Flick to display "reviews"→"rate and review"...
Page 44
When an account which "Automatically Level medium already set. adjust" is set to lock+ change − Set IS12T to be Off, you can set wallpaper wallpaper locked automatically light level. when you do not Show artist keyboard typing settings −...
Page 45
Notify me when Set notification communication. update new updates method of software − − Authenticate when are found update program. security IS12T is turned on Use my and PIN lock is not cellular data authenticated. connection to check for updates...
Item Content Default value Description Sound Clear Voice Set whether to ® Wi-Fi function of IS12T uses frequency band between 1 Quality make listening of and 11 channel. Settings the other person's voice easier for ® ■ Connecting Wi-Fi network calling.
Item Content Default value Description Application settings Internet Allow access Make the display Explorer to my location settings and security settings Allow cookies Make each setting of application. Some applications can be for Internet on my phone set in the applications. Explorer Mobile (▶P.30).
Page 48
Item Content Default value Description Item Content Default value Description Office User name User Make settings pictures+ Tap screen to Make settings related to Office. camera take pictures related to the Open camera and shot SharePoint Press and hold images (▶P.35). links in the camera button Office hub...
Note that the following data is not necessary for backing up because they are saved on network. After resetting to the state at the time of purchase, set your account again. The information will be displayed on IS12T. Data type Saving location on network Contacts Accounts with contacts such as Windows Live, Google (Gmail), etc.
If you forget password to unlock the screen and cannot ◎ You cannot back up the following data. operate IS12T, or if IS12T does not start, reset by key • Applications/games installed from Marketplace After resetting to the state at a time of purchase, install them operation.
• This can happen when you are saving Screen is not • When the battery becomes completely slow when I tap the a large volume of data to your IS12T or displayed even empty, goodbye screen appears and the screen or press a transferring a large volume of data.
Page 52
Press C/A to cancel sleep mode. when I press a I cannot use the • Turn IS12T off and then back on again or button. phone. (Out of remove and reload the au IC card. IS12T operation is •...
• Wi-Fi is a registered trademark of Wi-Fi Alliance. Try to reboot your IS12T if data is not displayed normally, or • "QR Code" is a registered trademark of DENSO WAVE if your tapping or key operations do not work properly.
Help..........18 PUK code......... 3 au IC card ........12 Your phone number ....25 Hubs ..........19 Rebooting IS12T ....... 51 Backing up data ......47 Zune PC software ..... 35 Icons ..........16 Receiving a call ......25 Basic operation ......
Page 55
In case above numbers are not available, (toll free) July 2011 Edition (except Okinawa) Sales: KDDI CORPORATION • (Okinawa) OKINAWA CELLULAR TELEPHONE COMPANY Manufactured by: FUJITSU TOSHIBA MOBILE COMMUNICATIONS LIMITED...
Need help?
Do you have a question about the IS12T and is the answer not in the manual?
Questions and answers