Table of Contents
Advertisement
Wait for the page to display a list of available extended WiFi networks,
which might take up to one minute.
10. Connect your WiFi-enabled device to the new extender WiFi network
using the extender SSID and password that you created in Step 10.
11. Make sure that your computer or WiFi device is connected before you
click the Continue button.
12. Click the Continue button.
A message displays confirming that the extender is connected and
ready.
13. Make sure that you can connect to the Internet and then click the
Next button.
The registration page displays.
14. Complete the registration fields and click the Finish button to
complete the setup.
If you do not want to register your extender, click the Skip
Registration link. Note that you must register your extender before
you can use NETGEAR telephone support.
The Status page displays.
15. Unplug the extender and move it to a new location that is about
halfway between your router and the area with a poor router WiFi
signal.
10
Advertisement
Table of Contents
