Table of Contents
Advertisement
TROUBLESHOOTING CHECK LIST
Problem
Power does not turn on
Disc fails to play
Camera angles cannot be
changed
Subtitles cannot be changed
Vocal languages (AUDIO)
cannot be changed
No sound output
Remote control doesn't work
Setup menu does not operate
TV MODE functions do not
work
•
Check if the power cord is securely plugged into the wall
•
Check if the batteries of the remote control unit are not
depleted.
•
Check if the disc is inserted properly into player (Label Side
Up).
•
Check if the disc has viewing restriction selected.
•
Check if the disc is the proper region code.
•
Not all discs are playable in the DVD.
•
Check with the beginning part of the manual on whether the
disc is playable.
•
The disc being played does not support ANGLE functions.
•
In order to check whether the disc supports the ANGLE
functions, see if the ANGLE indicator on the upper part of the
main display is illuminated.
•
The disc being played does not support subtitle functions.
•
The disc is prohibited from changing subtitle languages.
•
The disc being played does not support AUDIO functions.
•
The disc is prohibited from changing vocal languages (AUDIO).
•
Check whether the player is in slow or fast playback mode
it is case, then just press PLAY button for normal playback)
•
Check whether the MUTE function is on.
•
If the internal speakers are being used, make sure they are
selected during setup and volume is turned up.
•
Remote too far from the unit.
•
Batteries in the remote control are dead.
•
Angle of remote to unit too extreme.
•
DVD must have a setup menu; if the disc does not have a setup
you will not be able to display a menu.
•
Confirm Antenna is connected.
•
Confirm Air/Cable connection.
•
Confirm that unit is in TV mode.
31
Solution
(if
Advertisement
Table of Contents
