TouchLinc Owner’s Manual TABLE OF CONTENTS ABOUT TOUCHLINC ........................... 3 Key TouchLinc Features..........................3 What is Included with TouchLinc....................... 3 WHAT IS INSTEON?............................ 4 INSTALLATION............................4 Installing TouchLinc........................... 4 USB Stick and TouchLinc.......................... 4 USING TOUCHLINC............................. 5 Opening / Hiding the Keyboard Panel ....................... 6 ADVANCED FEATURES ..........................
TouchLinc Owner’s Manual ABOUT TOUCHLINC With its simple interface and wireless connection, programming and controlling your INSTEON systems, such as HouseLinc, will be easier and more convenient than ever. USB adapter Power port Power button Charging LED Reset button Key TouchLinc Features •...
Installing TouchLinc 1) Register for firmware updates at: www.smarthome.com/tlreg 2) If needed, connect the power supply to TouchLinc and plug into an outlet NOTE: Typical battery life is 3-4 hours. It is recommended that you plug the charger in when not in use.
TouchLinc Owner’s Manual USING TOUCHLINC Energy Save Mode To conserve power, the TouchLinc backlight will shut off after periods of non-use. TouchLinc will still respond to touches in Energy Save Mode, so try tapping the lower left corner to open the Start menu, to avoid inadvertently sending commands from a window that has been left open.
TouchLinc Owner’s Manual Calibrate 1) Double-tap the Calibrate icon Calibration wizard should launch 2) Follow instructions on the wizard My Computer If you have files you would like to save on TouchLinc, they must be placed in the My Computer → NAND folder.
NOTE: Updating the TouchLinc OS Firmware will remove all files from the local NAND drive on TouchLinc, including the native app. 1) Go to www.smarthome.com/tlsoftware to download the latest TouchLinc OS Firmware and save to your computer 2) Unzip the file and copy “nk.rom” and “tcboot.rom” to the root of an SD card from your computer 3) Make sure to turn TouchLinc off.
INSTEON signal improves. If it does, then you can plug in filters that will permanently fix the problem. ADDITIONAL RESOURCES Find home automation solutions, helpful tips, interactive demos, videos, user forums, and more at the Smarthome Learning Center: www.smarthome.com/learningcenter.html Page 8 of 11...
SPECIFICATIONS, CERTIFICATION, AND WARRANTY Specifications View specifications for TouchLinc at: www.smarthome.com/2448.html Certification This product has been thoroughly tested by ITS ETL SEMKO, a nationally recognized independent third- party testing laboratory. The North American ETL Listed mark signifies that the device has been tested to and has met the requirements of a widely recognized consensus of U.S.
TouchLinc Owner’s Manual FCC & Industry Canada Compliance Statement This device complies with FCC Rules Part 15 and Industry Canada RSS-210 (Rev. 7). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.