TPSD Control Menu Structure
Settings Menu
Float / Equalize Voltage
→
Equalize Timer Settings
→
→
Alarm Settings
→
Ground Detection
→
Alarm Enable
Temperature
→
Compensation Settings
Communication
→
Settings
LCD Settings
→
Return to Defaults
→
Test Menu
Test LEDs
→
Test Relays
→
Float Voltage
Equalize Voltage
Timer Mode
Timer Hours
Summary Alarm Selects
→
Alarm Delays
→
Alarm Threshold
→
Alarm Operation (Latching
→
Alarms)
Ground Detection
→
Temperature
Compensation On / Off
See section 3.4.1.5 (The communication settings are accessible only
in units equipped with communication options 21P, 21Q, 21S
LCD Backlight
→
Yes / No
LED Test
Test All
Test Contacts Individually
→
TEST HVSD
→
Low Current, AC Fail,
Ground Detection
Overload, End of Dis.
Ground Detection, AC, Low
Current, Low Voltage, High
Voltage, & HV Shutdown
Low current Alarm, Low
current Alarm Reset,
Overload alarm, Overload
alarm reset, low voltage
alarm, low voltage alarm
reset, end of discharge,
end of discharge reset, high
voltage alarm, high voltage
alarm reset, & high voltage
shutdown alarm
Summary, AC Power Failure,
Low DCV, High DCV, Pos
Ground, Neg. Ground, HVSD
Yes / No
Auto off 2 mins / Always On
Test Negative Ground Test
High DCV, Low DCV,
Positive Ground, AC Fail,
Summary, Low DCA
Warning: this test will
shutdown the unit and trip
the AC Breaker.
Yes / No
→
3-300 Seconds
→
Yes / No
→
27