Panasonic WV-CP280 Operating Instructions Manual page 13

v
Connect a coaxial cable (procured locally) to
the video output connector.
Important:
• When connecting a coaxial cable to the video output connector, make sure that the
coaxial cable connector is locked firmly.
Connect the video output connector to the monitor or other system device with a coaxial
cable. The maximum extendable length is shown in the table.
b
Connect the power cord between the camera and the power source.
• 220 V-240 V AC 50 Hz (WV-CP280)
Connect the power cord to an electrical outlet of 220 V-240 V AC 50 Hz.
• 12 V DC (WV-CP284)
Use the formula below to calculate the power cord and power supply. The voltage supplied
to the power terminals of the camera should be within 10.8 V DC and 16 V DC.
10.8 V DC ≤ V - 2(R x I x L) ≤ 16 V DC
A
L : Cable length (m)
R : Resistance of copper wire (Ω/m)
V : DC output voltage of power supply unit
A
I : DC current consumption (A). See specifications.
Resistance of copper wire [at 20 °C {68 °F}]
Power cord (procured locally)
DC 12V IN
• 24 V AC (WV-CP284)
The recommended cable length and thickness are shown in the table for reference. The
voltage supplied to the power terminals of the camera should be within 19.5 V AC and 28V
AC.
Power cord (procured locally)
AC 24V IN
1L
GND
Type of coaxial cable
Recommended
maximum
cable length
Copper wire
size (AWG)
Resistance
Ω/m
Resistance
Ω/ft
Copper wire
size (AWG)
2N
Length (m)
Length (ft)
RG-59/U
(3C-2V)
250
(m)
825
(ft)
#24 #22
2 2
(0.22 mm ) (0.33 mm )
0.078 0.050
0.024 0.015
#24 #22
2 2
(0.22 mm ) (0.33 mm )
20 30
66 100
VIDEO OUT
RG-6/U RG-11/U RG-15/U
(5C-2V) (7C-2V) (10C-2V)
500 600 800
1 650 1 980 2 640
#20 #18
2 2
(0.52 mm ) (0.83 mm
0.03 0.018
0.009 0.005
#20 #18
2 2
(0.52 mm ) (0.83 mm
45 75
150 250
)
)
13