Panasonic WV-CP280 Operating Instructions Manual page 11

• Simple day/night mode selector [D/N]
ON: The camera selects black-and-
white mode if the picture is dark, or
colour mode if the picture is bright
enough.
OFF: Colour picture is displayed normal-
ly.
Default setting: OFF
Note:
• The simple day/night function is
established by utilising the sense up
function for B/W images. The IR filter
is secured.
• Adaptive Black Stretch Selector [B.S.]
ON: The dark area of the object is auto-
matically corrected to lighten it.
OFF: Does not compensate.
Default setting: ON
Important:
• In the case of "ON" setting, noise
may be increased in the dark area of
the object.
• In addition, darkness and brightness
may be emphasised in the vicinity of
the boundary between the dark and
bright areas.
• Backlight compensation selector
[BLC]
ON: Compensates
automatically if it is brighter than
the object.
OFF: This mode is used when the front of
the object is extremely bright.
Default setting: OFF
Note:
• Under conditions such as extremely
strong backlight, the desired com-
pensation effect
achieved even with this mode set to
ON to detect the backlight level.
• Light control mode selector [ALC/ELC]
ALC: Adjusts the lens iris automatically.
ELC: Select this mode when a fixed iris
lens or manual iris lens is used with
this camera.
Default setting: ALC
the background
may not be
• Synchronization mode selector
[INT/LL]
Selects the camera
mode as either internal sync mode (INT)
or line-lock mode (LL).
INT: Sets to internal 2:1 interlace
LL: Sets to line-lock mode
Default setting: INT
synchronization
11