Sony WEGA KE-MV42A1 Operating Instructions Manual page 37

B) Label a channel using up to five characters (letters or numbers).
To do this:
1 Press PROG +/– to select the program number with the channel you want
to name.
Note
You cannot select the program number set to skip in the "Skip" option (see step
D below).
2 When the program you want to name appears on the screen, select the
Program Label option and press OK.
3 Press v/V/B or b to select the first character, then press OK.
4 When you have finished, press v/V/B or b to select the word "End" on the
screen and press OK to exit the character input screen.
5 Highlight the Confirm option and press OK. Then press v to select OK and
finally press OK to store the label.
• If you input a wrong character, select the character using % or 5 on the
screen. Then press v/V/B or b to select the correct character and press OK.
• For a blank, select on the screen and press OK.
C) Normally the automatic fine tuning (the Fine option default setting) will
give the best possible picture, however you can manually fine-tune the TV
to obtain a better picture if the picture is distorted.
To do this:
1 Press PROG +/– to select the program number with the channel you want
to fine-tune manually.
Note
You cannot select the program number set to skip in the "Skip" option (see step
D below).
2 When the program you want to fine-tune appears on the screen, select the
Fine option and press OK.
3 Press v or V to adjust the fine tuning between –15 and +15 and press OK.
4 Highlight the Confirm option and press OK. Then press v to select OK and
finally press OK to store your choice.
To restore automatic fine tuning, select Auto in step 3 above.
,continued 37