Haier HCR6250AGS Installation Instructions Manual page 17

1. Remove the anti-tip bracket from where it is taped inside the oven or storage
drawer.
2. Determine and mark centerline of the opening.
NOTE: The anti-tip bracket can be installed on either the left-hand side or right-
hand side of the opening.
3. Place the anti-tip bracket onto the floor so that the distances from the center of
the bracket to the center line and to the wall is correct for your model. See the
following chart for the required distances.
4. Drill two 1/8" (3 mm) holes through the mounting holes in the anti-tip bracket and
into the floor.
Model Size Dimension A
24"
36"
5. Using the two screws provided, secure the anti-tip bracket to the floor.
NOTE: A rear leg of the range will be centered within the anti-tip bracket when it
is moved into its final position.
Front Position
Centerline
a
171/2" (53.5 cm)
324/5" (83.5 cm)
Rear Position
b
Dimension B
5" (12.7 cm)
5" (12.7 cm)
Diagonal
15