Advertisement
Using the click-on attachments
Using the beard styler attachment
(specific types only)
1
Make sure that the appliance is switched off.
2
Pull the shaving unit straight off the appliance.
Note: Do not twist the shaving unit while you pull it off
the appliance.
3
Insert the lug of the beard styler attachment
into the slot in the top of the appliance.
Then press down the beard styler attachment
to attach it to the appliance ('click').
Using the beard styler attachment with comb
You can use the beard styler attachment with the
comb attached to style your beard at one fixed
setting, but also at different length settings.
The hair length settings on the beard styler
attachment correspond to the remaining hair
length after cutting and range from 1 to 5mm.
1
Slide the comb straight into the guiding
grooves on both sides of the beard styler
attachment ('click').
2
Press the length selector and then push it
to the left or right to select the desired hair
length setting.
3
Press the on/off button once to switch on
the appliance.
4
You can now start styling your beard.
ENGLISH
15
Advertisement
