Table of Contents
Advertisement
Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the
remote control by sliding the lid in the direction of the arrow.
2
Insert two AA batteries inside the battery compartment
with their + and – ends aligned as indicated.
3
Replace the battery compartment lid.
Using the Remote Control
Point the remote control at the VCP's remote sensor when
operating the VCP.
Do not put objects between the remote control and the VCP.
VCR Maintenance
Use only tapes with the
Remove any light adhesive stick-on notes from the video cas-
sette tape before putting the tape in the VCP. Removable labels
can jam the VCP.
Periodic maintenance is required to maintain your VCP's excel-
lent performance. This VCP has an Automatic Head Cleaner.
However, the video heads will require replacement eventually.
Only an authorized service center should perform this service.
Types of Video Cassette Tapes
The chart below shows the playback time for three types of video
cassettes (T160, T120, and T60). There are three playback speeds:
SP, LP, and SLP.
Tape Speed
SP
(standard play)
LP
(long play)
SLP
(super long play)
mark.
Cassette type/Playback Time
T160
T120
2 hrs.
2 hrs.
40 mins.
5 hrs.
4 hrs.
20 mins.
8 hrs.
6 hrs.
Before Using Your VCP 5
T60
1 hr.
2 hrs.
3 hrs.
• The remote control and its batteries
• Do not mix alkaline and man-
• Do not mix old and new batteries.
Helpful Hints
are supplied.
ganese batteries.
1
2
3
Advertisement
Table of Contents
