Battery Safety And Handling - Kodak EasyShare CD43 User Manual

Battery safety and handling

CAUTION:
When removing batteries, allow them to cool first; batteries may be
hot.
I Read and follow all warnings and instructions supplied by the battery
manufacturer.
I Use only batteries that are approved for this product.
Keep batteries out of the reach of children.
I
Do not allow batteries to touch metal objects, including coins. Otherwise, a battery
I
may short circuit, discharge energy, become hot, or leak.
I Do not disassemble, install backward, or expose batteries to liquid, moisture, fire,
or extreme temperature.
Replace all batteries of a set at the same time. Do not mix new batteries with used
I
ones. Do not mix rechargeable and non-rechargeable batteries. Do not mix lithium,
Ni-MH, and Ni-Cd batteries together. Do not mix batteries of different chemistry
types, grades, or brands. Failure to observe this precaution may cause leakage.
I Remove batteries when the product is stored for an extended period of time. In the
unlikely event that battery fluid leaks inside the product, contact your local Kodak
Customer Service representative.
I In the unlikely event that battery fluid leaks onto your skin, wash immediately with
water and contact your local health provider. For additional health-related
information, contact your local Kodak Customer Service representative.
Dispose of batteries according to local and national regulations.
I
Do not charge non-rechargeable batteries.
I
For more information on batteries, see
www.kodak.com/global/en/service/batteries/batteryUsage.jhtml
www.kodak.com/go/support
Downloaded From camera-usermanual.com Kodak Manuals
Appendix
55