Kodak EasyShare CD43 User Manual page 35

Setting
Video Size
Choose a video resolution.
This setting remains until you
change it.
White Balance
Choose your lighting
condition.
This setting remains until you
turn the Mode dial.
ISO Speed
Control the camera's
sensitivity to light
This setting remains until you
turn the Mode dial.
Focus Zone
Select a large or concentrated
area of focus.
This setting remains until you
turn the Mode dial.
www.kodak.com/go/support
Downloaded From camera-usermanual.com Kodak Manuals
Icon Options
320 x 240—Video plays in a 320 x 240 pixel
window (QVGA).
Auto (default)—automatically corrects white
balance. Ideal for general picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household
light bulbs. Ideal for indoor pictures under tungsten or
halogen lighting without flash.
Fluorescent—corrects the green cast of fluorescent
lighting. Ideal for indoor pictures under fluorescent
lighting without flash.
Unavailable in Video mode.
Choose a lower ISO setting in brightly lit scenes; use
a higher ISO for low-light scenes. Choose Auto
(default), 80, 100, 200, 400.
NOTE: ISO speed changes depending on whether the flash is on
or off.
ISO returns to Auto when the camera is set to Sport,
Portrait, or Scene mode, or during Long Time Exposure.
Unavailable in Video mode.
Multi-zone (default)—evaluates 2 zones to give
an even picture focus. Ideal for general picture taking.
Center-zone—evaluates the small area centered in
the viewfinder. Ideal when precise focus of a specific
area in the picture is needed.
NOTE: For the best pictures, the camera is set to Multi-zone when
in Landscape mode.
Unavailable in video mode.
Doing more with your camera
29