Toshiba CAMILEO BW10 Quick Start Manual page 16

CAMILEO BW10
AFTER USING THE CAMCORDER IN
WATER
After using the camcorder in water, wash it with fresh water and dry it
completely.
1
Turn off the camcorder, and close the slot cover and terminal cover
securely.
2
Wash the camcorder with fresh water.
h Fill a shallow basin with fresh water, and immerse the closed camcorder
for about 5 minutes. Rotate the monitor unit several times to clean it
completely.
3
Dry the camcorder.
h Use a dry cloth to wipe off any drops adhering to the camcorder, and
leave it to dry completely in a well-ventilated place away from direct
sunlight.
h Do not use a hair dryer or the like to dry the camcorder. Exposing the
camcorder to high temperatures may cause the camcorder and/or
waterproof seal to become deformed.
HINT
About the handstrap
i Wash the handstrap in fresh water after detaching it from the camcorder.
i After washing, leave it to dry in a place away from direct sunlight.
CAUTION
i Do not use detergent, as doing so may cause water to leak into the
camcorder.
EN
Downloaded From VideoCamera-Manual.com Manuals
15 Quick Start Guide