System Connections; Connecting To External Av Signal Source - Audiovox FPE1906DV Operating Instructions Manual

System Connections

Do not connect the power cord until all other connections have been made.
Ensure that you observe the color cord when connecting audio and video cables.

Connecting to External AV Signal Source

Use the audio and video cable to connect the AV input jacks on the rear panel of the unit to the
external AV signal source.
Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear panel of the unit to the
external AV signal source.
After connection, turn on the power of the unit and the external AV signal source and then press the
SOURCE button to shift to CVBS or S-VIDEO mode.
Note: the L/R audio input jacks can be used in the both CVBS and S-VIDEO modes.
- 12 -