Writing Ddc Program Step - AOC E2460PDA Service Manual

Service Manual E2460PDA

9.4 Writing DDC program step

1. Prepared the PC with Windows XP system, DDC recording device (12V)
2. Connect the DDC recording device and the PC through PC parallel port
3. setup"Port95nt" driver program to PC ,
4. select relevant program and run it, below figure will appear
5, Press "LoadFile", select EDID -model of product, and select input port;
6. key in SN, and other informatiom, key-press "Pragram" button;
for figure below:
47
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn