Running/Charging Dc Appliances/Usb Devices - Viking 62749 Owner's Manual

Running/Charging DC Appliances
1. Verify Power Pack is fully charged and
recharge as needed. Refer to Charging
the Power Pack on page 7.
2. Make sure that the appliance to be
powered is turned off and its power
requirement does not exceed 6 A .
3. Plug the 12 V Port Adapter into
the 12 V DC Output Port on the
side of the Power Pack.
Running/Charging USB Devices
1. Verify Power Pack is fully charged and
recharge as needed. Refer to Charging
the Power Pack on page 7.
2. Plug the supplied USB Cable (or the
device USB cable) into the USB Output
Port on the side of the Power Pack.
3. Plug the appropriate connector on
the USB Cable into the device.
Item 62749
For technical questions, please call 1-888-866-5797.
4. Plug the appliance into the
12 V Port Adapter.
5. Turn on the appliance.
6. When finished using, turn off
and unplug the appliance.
7. Recharge the Power Pack.
4. Press and hold the Main Power Button
about one second to turn on the Power
Pack. Turn device on, if necessary.
5. When finished using, unplug the
device from the USB Cable.
6. Recharge the Power Pack.
Page 9