Table of Contents
Advertisement
4. WEB GUI
Start the web browser on the PC and connect to USF-1043FS installed in the USF-212S frame. The
following window will open.
*
Refer to the USF-212S operation manual for how to connect to USF-1043FS from the web browser.
Clicking on a tab, Video, Audio, Status, Utility, or Trap, enables you to select a top menu.
Clicking on an item with an arrow ( ) mark enables you to select a sub menu.
4-1. Video Process
Navigate to the Video Process screen by clicking Video, then Video Process.
Refresh: Updates the screen into the latest.
Unity: Resets a parameter to default value.
Clicking ＋ increases the setting by a minimum step.
Clicking － decreases the setting by a minimum step.
The settings can be changed by using a slider or by inputting a value directly into the white box.
*
Note that slider input may drastically change values. It is recommended to use the sliders for
rough tuning and to use ＋ or － Buttons, or to directly input the values, for precise tuning.
9
Advertisement
Table of Contents
