Sony KV-HR36M31 Service Manual page 6

r l
3.
Blinking count display of
/
indicator
< FRONT PANEL >
*
One blink is not used for self-diagnosis
<Diagnosis Items> <Number of Blinks>
+B overcurrent 2 times
J A A L
+B overvoltage 3 times
d r ~ r
. .
,
.
Vertical deflection stop 4 times
-~.J~JJ-A~~~.JJI
% -
-
a
~ndicator
@A'
Lamp
ON :
0.3 seconds
- -
; -
+----;
Lamp OFF
:
0.3 seconds
- -
3.0 Lamp seconds OFF
:
Release of indicator blinking.
The STAYD
BY
indicator b l i n h g display is released by turning OFF the power switch
on the TV main unit or removing the plug from [he power.
But in the RLJY ERR (10 times b l i n h g ) . do not release by tuning power off.
For details. refer to the item 1-6.
4. Self-diagnosis screen displays
In cases of malfunctions where it is not possible to determine the symptom such as when the power goes off occasionally or when
thc screen disappears occasionally, there is a screen display on whether the malfunction occurred or not in the past (and whether
the detection circuit operated or not) in order to allow confirmation.
<Screen Display Method>
Quickly press the remote command button in the following order from the standby state
Be aware that this differs from the method of
entering the service mode
(
r / 1 + /
)
Self-diagnosis screen display
"G"
:
OK, "NG" : DETECTS ONCE OR MORE
THE 10 DIGITS OF NUMERALS ARE FOR CHECKING,
NO RELATION TO DIAGNOSIS.
101 : NO LED BLINKING FOR WDT.
"0" : NUMBER OF DETECTION.