Mount Into The Dashboard - Philips CE135BT User Manual

Mount into the dashboard

• If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
• If the car battery is not disconnected, to
avoid short-circuit, make sure that the bare
wires do not touch each other.
1
Make sure that the car dashboard opening
is within these measurements:
2
Remove the mounting sleeve with the
supplied disassembly tools.
EN
8
3
Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
1 8
3 m
m
4
Slide the unit into the dashboard until you
hear a "click".