Makita HK0500 Technical Information page 13

N
otes in assembly
(1)Field leas wire (Black)
(2) Within Handle
Be careful so that Lead
wires ( Orange and
Purple)for connecting
Brush holder may not
slacken toward the
Commutator side.
Store Field lead wire
(White) and Lead wire for
Earth relay ( if used) after
having attached Brush
holder.
Do not store Varnished
polyester tube (for protection
of White filed lead wire
andLead wire for earth relay,
if used ) into Lead holder.
Handle
Store Lead wire into
Lead holder.
Insulated connector for
connecting Earth lead wire
( if used )
See to it that Field lead wire
willnot run on the diagonal line
part in the Illustration.
Do not make Lead wire
loosened here.
Place Choke coil lead wire here ,
folded as shown in the illustration.
Terminal block (if used)
When using Insulated
connector
place it around
here.
Noise suppressor (if
used)