Haier hwd1000 User Manual page 20

Warning Item of Content of Action to take Checking position
code concern identification and ask for help
Water supply The water level can not Warning and stop Check if the water
reach the reset water level running pressure or water
E11 within 5 minutes supply is low
Drainage The water level can not Warning and stop Check if the water
reach the setting water level running pressure is low or
within 8 mintues stops supplying
E12 Drainage The water level can not Warning and stop Check the water
reach the reset level in 8 running outlet of the drainage,
minutes after drainage adjust it and restart
starting the machine
E13 Water supply The water is above the Warning and stop Ask the technician to
warning level running repair it
E31 Motor The feedback signal does Warning and stop Ask the technician to
not change in 8 minutes running repair it
during the motor runs
EA3 Water level is The water setting level Warning and stop Check the water
abnormal in during the drying process running outlet of the drainage
the drying required and adjust it
process if required and restart
the machine
EC4 The tempera- Within 30 minutes of dry Warning and stop Ask the technician to
ture of air vent cycle there is 5 minutes in running repair it
which the temperature is not
increasing
EC5 The dry The drying sensor circuit Warning and stop Ask the technician to
temperature short or open running repair it
sensor
U01 Door is locked Can not unlock Warning and stop Ask the technician to
running repair it
U02 Door is not Can not lock the door Warning and stop Ask the technician to
locked running repair it
U03 Spin Iopsidely The judgement of Spin at low speed Ask the technician to
un-balance is above 1000g and cancel drying repair it
U04 The door is The door is opened Warning Close the door
opened
E22 The memory EEPROM is not functioning Warning Ask the technician to
function has repair it
failed
19