Set Sleep Timer; Play Audio From An External Device - Philips AJ6200DB/93 User Manual

Table of Contents

Advertisement

BUZZ
Activate/deactivate alarm timer
Note
Make sure that the Third Knob switched to CLOCK
before setting.
1
Press AL1/AL2 to view alarm settings.
» The
/
lights up.
2
Press AL1/AL2 again to activate or
deactivate the alarm timer.
» The
/
appears if alarm timer is on
and disappears if it is off.
• To stop the ringing alarm, press the
corresponding AL1/AL2.
» The alarm repeats ringing for the next
day.
Snooze the alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing
nine minutes later.
FM

Set sleep timer

Note
Make sure that the Third Knob switched to CLOCK
before setting.
This clock radio can switch to standby mode
automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
appears.
To deactivate the sleep timer:
Press SLEEP repeatedly until [OFF] (off)
appears.
15
30
60
OFF
Play audio from an external
device
Note
Make sure that the Third Knob switched to CLOCK
before setting.
You can listen to audio from an external device
through this clock radio.
1
Connect an audio cable to:
• the AUDIO IN socket on the clock
radio.
• the headphone socket on an external
device.
2
Press SOURCE repeatedly to select the
Audio-in source.
» The
on the display panel lights up.
3
Play the external device (refer to its user
manual).
90
120
EN
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aj6200dbAj6200d

Table of Contents