Panasonic CQ-DFX972N Operating Instructions Manual page 31

Cautions:
¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your
hands and fingers.
First complete the electrical connections, and
then check them for correctness. (
The included Mounting Collar q is designed
specially for this unit. Do not use it to attach
any other model.
e Power Connector
Mounting Springs ( C )
Engage the Mounting
Springs ( C ) in the
mounting holes of the
Mounting Collar q firmly.
Mounting Spring
a Page 34)
Mounting
Hole
Insert Mounting Collar q into the
1
dashboard, and bend the mounting
tabs out with a screwdriver.
The tabs to be bent vary depending on
the car. To securely install the unit, fully
bend a number of the tabs so that there
is no rattling.
Example:
q Mounting
Collar
Mounting Holes
w Mounting Bolt
Secure the rear of the unit.
2
After fixing Mounting Bolt w and Power
Connector e, fix the rear of the unit to the car
body by either method (a) or (b) shown on the
previous page.
3
Insert Trim Plate t.
After installation reconnect the
4
negative (–) battery terminal.
CQ-DFX972N
E
N
G
L
I
S
H
28
Tab
31