Cd Player - Panasonic CQ-DFX972N Operating Instructions Manual

CD Player

E
N
G
L
I
S
H
13
To Stop and Eject the Disc
Open the front panel and press [u] .
Note: The unit returns to the previous mode when the
disc is ejected in the CD player mode.
[DISP] (Return)
[SRC] (Source)
PUSH
[SOURCE]
(Source)
[BAND]
(Pause/Set)
Cautions:
¡Do not use irregularly shaped discs.
¡Do not use discs that have a seal or label attached.
¡Be sure to close the front panel while CD playback.
¡To avoid damaging the front panel, do not push it down
or place objects on it while it is open.
¡ Do not pinch your finger or hand in the front panel. Do
not insert foreign matter into the disc slots.
16
Label Side
[1] [2]
(Track/Fast forward/Fast reverse)
[}] [{] (Select)
[MENU]
(Menu/Return)
[SEL] (Menu/Return)
[1] [2]
(Track/Fast forward/
Fast reverse)
[}] [{]
(Select)
[DISP] (Return)
CQ-DFX972N
Open the Front Panel
1
Press [OPEN] on the front panel.
2
Insert a Disc
Insert a disc and close the front panel. Playback
will start automatically after the unit recognized the
loaded disc as an ordinary music CD. (When a
CD-R or CD-RW which has CD-DA formatted data
is loaded, this unit recognizes it as an ordinary
music CD.)
Notes:
¡Do not insert a disc when
because a disc is already loaded.
¡The power will be turned on automatically
when a disc is loaded. (
¡If a disc contains both CD-DA and MP3 data, only
first-recorded data is played.
When a disc is in the player...
[BAND]
(Pause/Set)
Press [SRC] / [SOURCE] to select the CD player
mode and playback starts.
CD Player Mode Display
Track Selection
[2] : Next track
[1] : Beginning of the current track
Previous track (Press twice.)
Fast Forward / Fast Reverse
Press and hold
[2] : Fast forward
[1] : Fast reverse
Release to resume the playback.
Pause
Press [BAND] to pause.
Press [BAND] again to resume the playback.
(Data reading)
(Ordinary music CD
recognized and play-
back starts.)
indicator lights
ACC ON
)
Track Number Play Time
Lights when a disc is in the player