Checking Whether The Upgrade Was Done Properly; Updating The Bluetooth Wireless Technology Software - Pioneer T1000-20496 Update Instructions And Operation Manual

Instructions for upgrading
6 Enter the password for authentication
that you obtained, then touch [OK].
A message confirming whether to restart the
navigation system appears.
7 Touch [OK].
The navigation system restarts and then the in-
stallation begins.
8 Wait until the upgrade process is com-
plete.
After the installation is complete, the naviga-
tion system restarts.
Checking whether the upgrade
was done properly
Display "Service Information Screen" screen
to compare the current version number with
the previous one.
1 Press the HOME button to display the
"Top Menu" screen.
2 Touch [Settings].
The "Settings Menu" screen appears.
3 Touch [System Settings].
The "System Settings" screen appears.
4 Touch [Service Information].
The "Service Information Screen" screen ap-
pears.
5 Check the version information.
6 Eject the upgrade microSD card.
Updating the Bluetooth
wireless technology software
Access the Pioneer website to check your
phone's compatibility. If your phone is on the
list and you wish to update, manually update
the Bluetooth firmware after the automatic up-
grade is finished.
http://www.pioneer.eu
CAUTION
! Be sure to upgrade your navigation system
first.
! Be careful to follow the update procedure cor-
rectly. If you make a mistake, Bluetooth wire-
less technology functions will become
unavailable.
p Consult your authorised dealer if you are
unable to use Bluetooth wireless technol-
ogy functions.
! Be sure to complete the Bluetooth firmware
update procedure without interruption.
p Registered phones that are listed on the
"Connection List" screen are cleared by
the software update.
Chapter
06
21
Engb