Turn On; Set Clock; Listen To Radio; Tune To A Radio Station - Philips CEM200 User Manual

To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.

Turn on

1
Press to turn on the unit.
To turn off the unit, press
seconds.

Set clock

1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly until the
currently time is displayed.
3
Turn clockwise to set hour.
4
Press
5
Turn anti-clockwise to set minute.
6
Press
View clock
1
Press MENU/DISP repeatedly until the
clock is displayed.
14 EN

4 Listen to radio

Tune to a radio station

1
Press SOURCE repeatedly to select
Tuner.
2
Press
[FM2], [FM3], [AM1], or [AM2] .
3
Press
manually.
»
Select tuner sensitivity
You can adjust the tuner sensitivity if you want
to receive more radio stations or only stations
with strong signal.
1
Press MENU/DISP for over 2 seconds.
2
Press
for 3
or [DX] is displayed.
3
Rotate
Select stereo/mono broadcasting
For stations with weak signals: to improve the
reception, change to monoaural sound.
1
Press MENU/DISP for 3 seconds.
2
Press
or [MONO] is displayed.
3
Turn
or to select band: [FM1],
or to tune to a radio station
The radio station is broadcast.
To search for a radio station
automatically, press
seconds.
or repeatedly until [LOCAL]
to select a setting:
[ LOCAL] (local): Only stations with
strong signal can be broadcast.
[ DX] (distance): Stations with strong
and weak signals can be broadcast.
or repeatedly until [STEREO]
to select a setting:
[STEREO]: stereo broadcast.
[MONO]: mono broadcast.
or for 3