Optimal Audio Performance For Windows - Revolabs FLX UC 500 Installation And Operation Manual

Optimal Audio Performance for Windows

For the best audio experience follow this one-time setup procedure:
1. Right click on the speaker icon in the lower right hand corner of the
Windows taskbar.
2. Select Sounds from the menu.
3. Click the Playback tab.
4. Right click on the Revolabs Digital Audio Device.
5. Select "Set as Default Device" from the menu.
6. Right click on the Revolabs Digital Audio Device again.
7. Select "Set as Default Communication Device" from the menu.
8. Right click on the Revolabs Digital Audio Device one more time.
9. Select Properties from the menu.
10. If there is an "Enhancements" tab, click on it.
11. Check the "Disable all enhancements" box.
12. Click on the Advanced tab.
13. Select "24 bit 48000 Hz (Studio Quality)" from the drop-down menu under
Default Format.
14. Click "Test." You should hear a test jingle.
15. Click "Apply", then "OK".
16. Click the Recording tab.
17. Right click on the Revolabs Digital Audio Device.
18. Select "Set as Default Device" from the menu.
19. Right click on the Revolabs Digital Audio Device again.
20. Select "Set as Default Communication Device" from the menu. You should
see the green VU-meter moving next to Revolabs Digital Audio Device.
21. Right click on the Revolabs Digital Audio Device one more time.
22. Select Properties from the menu.
23. Click on the Levels tab.
24. Reduce the Microphone level to 50.
25. Click "OK".
26. Click "OK" to close the Sound Window.
12