Table of Contents
Advertisement
TIMER PROG
PR
PR
STOP
REC/ITR
22
Recording
Manual recording
This is the function used to record a TV programme or signal from
external equipment onto a video cassette tape. The set cannot
record any programme in the NTSC system as the NTSC system
is only for playback.
1. Insert a tape with the safety tab into the cassette compartment.
Note : Select the recording tape speed
SP/LP button after inserting a tape with the safety tab.
2. Press the REC/ITR button once. The display
on the screen. The REC indicator will illuminate.
3. When the desired recording is completed, press the STOP
button. If the tape reaches the end before you press the STOP
button, the set automatically stops, rewinds to the beginning
and ejects the tape.
Note :
a. If you try to record a tape without a safety tab, it will be
automatically ejected to prevent accidental erasure. If you want
to use the tape without the safety tab, stick a small piece of
tape over the safety tab hole.
b. If you don't wish to monitor while recording, press the r-
c. The picture or sound on the channels with Auto AV On might
be unstable temporarily at the beginning period of recording
because of the signal switching period.
WARNING
Unauthorized recording of copyrighted programmes, films, video
tape and other materials may infringe upon the right of copyright
owners and be contrary to copyright laws.
Instant timer recording (ITR)
SP/LP
This function is convenient when you want to start recording
immediately without going through the entire timer setting
procedure. You don't have to set the time to use this function.
1. Insert a tape with a safety tab.
2. Press the REC/ITR button twice.
The display
number.
3. Repeatedly press the REC/ITR button to set the recording
length, which appears on the screen. You can select up to 9
hours at 30-minute intervals.
After recording for the preset time, the set switches to standby.
To cancel the ITR function, press the REC/ITR button until the
display
ITR 0:00
Timer programme setting
You can programme the set to start and end recording while you
are away. Up to 5 recordings within one month can be program-
med at the same time.
1. Press the TIMER PROG button on the remote control handset
to display the
and the day of the week automatically appears under the
display
2. Press the
3. Select
with the
will appear with the recording programme
ITR 0:00
appears.
Timer programme
Timer programme
button to select a recording item.
/
D
E
PR
with the
button and set the programme number
G
button.
/
D
E
SP
or
menu. The current time
.
LP
with the
appears
button.
I
Advertisement
Table of Contents
