LG KE-20P32X Service Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. TV VCR Combo
  5. KE-20P32X
  6. Service manual
LG KE-20P32X Service Manual

LG KE-20P32X Service Manual

Tvcr
Hide thumbs Also See for KE-20P32X:
Table of Contents

Advertisement

Quick Links

TVCR
SERVICE MANUAL
CHASSIS : MV-031A
MODEL : KE/KL-20/21P32X
MODEL :
KF-20/21P32
MODEL
SECTION 1
CONTENT
SPECIFICATION ................................................1-2
SAFETY INSTRUCTIONS ............................ 1-3
SERVICING PRECAUTIONS ....................... 1-4
DESCRIPTION OF CONTROLS .................. 1-6
SUMMARY

Advertisement

Table of Contents
loading

Related Manuals for LG KE-20P32X

Summary of Contents for LG KE-20P32X

  • Page 1 SECTION 1 SUMMARY TVCR SERVICE MANUAL CONTENT SPECIFICATION ..........1-2 SAFETY INSTRUCTIONS ......1-3 SERVICING PRECAUTIONS ....... 1-4 DESCRIPTION OF CONTROLS ....1-6 CHASSIS : MV-031A MODEL : KE/KL-20/21P32X MODEL : KF-20/21P32 MODEL...

  • Page 2: Table Of Contents

    SPECIFICATIONS Video Video Signal Processing System ............................................PAL/SECAM /NTSC 4.43(VCR playback only) Video Head System ................................Double azimuth 4 heads, helical scanning system Head ...........................................................Two heads Tape Speed ........................................................SP/LP Tape Format ....................................................VHS, width 1/2" Timer ....................................................24 hours display type Tape Loading System ................................................Front loading Input/Output Signal Level ..........................................1Vp-p, 75Ω...

  • Page 3: Safety Precautions

    SAFETY PRECAUTIONS IMPORT ANT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards.

  • Page 4: Power Source

    SERVICING PRECAUTIONS CAUTION: Before servicing receivers covered by this service following techniques should be used to help reduce the manual and its supplements and addenda, read and follow the incidence of component damage caused by static by static SAFETY PRECAUTIONS on page 3 of this publication. electricity.
  • Page 5 c. Qulckly move the soldering iron tip to the junction of the Removal/Replacement component lead and the printed circuit foil, and hold it 1. Clip each fuse or resistor lead at top of the circuit board there only until the solder flows onto and around both the hollow stake.

  • Page 6: Description Of Controls

    DESCRIPTION OF CONTROLS All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset EJECT Before you use the remote control handset, please install the batteries.
  • Page 7 17.EJECT ejects the tape. 18.TV/AV selects a TV or AV mode. 19.MENU EJECT selects a menu. 20.OK accepts your selection or displays the current mode. 21.FF (FAST FORWARD/CUE) winds the tape forward at high speed in the stop mode. MUTE TV/AV fast forward playback.

  • Page 8: Front Panel

    Front panel 1. MAIN POWER (ON/OFF) switches the set on or off. Note : One power line lives even when the 14 9 main power is off. 2. POWER (r- switches the set on from standby or off to standby. ON/OFF STOP/EJECT REW/...
  • Page 9 SECTION 2 DISASSEMBLY PART TVCR SERVICE MANUAL CONTENT EXPLODED VIEW ..........2-2 EXPLODED VIEW PARTS LIST ....2-3 DISASSEMBLY INSTRUCTIONS....2-4 CHASSIS : MV-031A MODEL : KE/KL-20/21P32X MODEL : KF-20/21P32 MODEL...

  • Page 10: Exploded View

    EXPLODED VIEW...
  • Page 11 The components identified by mark critical for safety. EXPLODED VIEW PARTS LIST Replace only with part number specified. PART NO DESCRIPTIONS LOCA. NO 20” 21” 2426GCA40CP 2426GDA80CS CPT SET 2426VDC0029 CPT SET 120-D44D 120-D44D SPEAKER,GENERAL 16 OHM 3W/5W 83DB 150-D02M 150-D02N COIL, DEGAUSSING,CU 21 60T 12 OHM 6150Z-1014A...
  • Page 12 DISASSEMBLY INSTRUCTIONS 1. Back Cover Removal 5. CPT REMOV AL Remove the screws residing on the back cover and carefully 1) After removal of VCR chassis and speaker assy, remove the separate the back cover from the front cabinet and P/cord CPT board from CPT neck.
  • Page 13 SECTION 3 ELECTRICAL PART TVCR SERVICE MANUAL CONTENT PURITY & CONVERGENCE ADJUSTMENT ..3-2 ADJUSTMENT INSTRUCTIONS ....3-5 BLOCK DIAGRAM ..........3-9 WIRING DIAGRAM ........3-10 TROUBLESHOOTING CHARTS ....3-11 PRINTED CIRCUIT BOARDS .......3-16 COMPONENT LOCATION GUIDE .....3-17 CHASSIS : MV-031A MODEL : KE/KL-20/21P32X MODEL : KF-20/21P32 MODEL...

  • Page 14: Purity & Convergence Adjustment

    PURITY & CONVERGENCE ADJUSTMENT Caution: 5. Reconnect the internal degaussing coil. Convergence and Purity have been factory aligned. Do not attempt to tamper with these alignments. 6. Position the beam bender locking rings at the 9 o'clock However, the effects of adjacent receiver components, or position and the other three pairs of tabs (2,4 and 6 pole replacement of picture tube or deflection yoke may require the magnets) at the 12 o'clock position.
  • Page 15 1.ADJUST YOKE Z-AXIS FIRST 2 .ADJUST BEAM BENDER 2 POLE TO GET EQUAL BLUE MAGNET TO GET FOUR EQUAL COLOR CIRCLES COLOR CIRCLES MAGNETS 8. Referring to above, perform the following two steps: 6. Reconnect the internal degaussing coil and apply AC power. a.
  • Page 16 ROTATION DIRECTION RING MOVEMENT OF RED OF BOTH TABS PAIRS AND BLUE BEAMS OPPOSITE POLE SAME OPPOSITE POLE SAME UP/DOWN ROCKING OF THE YOKE LEFT/RIGHT ROCKING OF THE YOKE UP/DOWN ROCKING OF THE YOKE LEET/RIGHT ROCKING OF THE YOKE CAUSES OPPOSITE ROTATION OF RED CAUSES OPPOSITE SIZE CHANGE OF THE CAUSES OPPOSITE ROTATION OF RED CAUSES OPPOSITE SIZE CHANGE OF...

  • Page 17: Adj

    FIGURE 2> P2/P3 ADJUSTMENT WAVEFORM It refers the standard color signal to LG standard signal. 3.2.1. NECESSARY INSTRUMENT If LG standard signal is a criterion,PAL standard signal is PAL- B/G 05 CH and SECAM standard signal is SECAM 04CH or 1. CTL TAPE 40CH.
  • Page 18 adjust CTL waveform to the following procedures. 3.3.4. P2/P3(RF LINEARITY) CHECK & ADJUSTMENT A. If is over 2.5 :1, lower the head height. 1. Adjust p2 & p3 so that the the RF envelope waveform of the After turning the height adjust screw counter-clockwise to oscilloscope becomes C in figure 2.

  • Page 19: Amp

    4.3. PURITY AND CONVERGENCE ADJUSTMENT 4.5 WHITE BALANCE : Warm up the TV set at least 15 minutes before adjustment. 4.5.1 NECESSARY INSTRUMENT 4.3.1. PURITY ADJUSTMENT : WHITE BALANCE METER 4.5.2 ADJUST PREPARATION 1. After degaussing the CPT with using the degaussing coil, set the picture at Standard ON.
  • Page 20 4.7. CDL DATA ADJUSTMENT 1. Input PAL DIGITAL PATTERN(EU05CH). 2. Press SVC key on the service remote controller and select LINE SERVICE 1 mode. Adjustable item is selected by CH+/- key,variable item is selected by VOL +/- key 3. Initial Establishment Data Status Ccntents 21”...

  • Page 21: Block Diagram

    BLOCK DIAGRAM...

  • Page 22: Wiring Diagram

    WIRING DIAGRAM CPT PWB P802 P602 P804 SMPS PWB P805 P708 P708 P602 P901A P702 P100 P804 P703 P103 P102 P805 P708 P805 TOUCH 3-10...
  • Page 23 TROUBLE SHOOTING NO POWER : NO STAND-BY Check if the Replace the Fuse Fuse is O.K.? Is there voltage at Check/Replace pin 9 of T801? DB801, R801, C806. Check/Replace Is there about 6.1V D806, Q801, R807, ZD801, C814, at pin 9 of IC801? IC801.
  • Page 24 NO POWER : NO MONITOR ON Check the Go to NO POWER (NO ST-BY) NO POWER(NO ST-BY) BLOCK BLOCK Is there about Check the pin 10 of P804 ; "HIGH" 6V at pin 9 of P804? ¡ Check/Replace D851, L851, Is there about 115V C860, IC851.
  • Page 25 NO RASTER Is there about 115V Go to NO POWER BLOCK at pin 3 of T701? ¡ Check/Replace F852, D850, Is there about 8V R858, IC853, C863. at pin 6 of P805? ¡ Check the 8V LINE of VCD BOARD ¡...
  • Page 26 V. Deflection ERROR Does the V-A, V-B Check the vertical part of VCD signal appear at pin 4, 7 of P805? Is there about Check/Replace FR702, D703, C703. 14V at pin 6 of IC701? Is there about Check;/Replace FR701, D702, C704. -14V at pin 1 of IC701? Check/Replace IC701 NO PICTURE...
  • Page 27 NO SOUND Is there about Check/Replace FR854, D855, IC601. 25V at pin 5 of IC601? Does the sound Check the Audio source line of signal appear at pin 9 of P805? ¡ Check the voltage at collector of Does the sound signal appear at pin 4 Q602.

  • Page 28: Printed Circuit Boards

    PRINTED CIRCUIT BOARD MAIN 3-16...

  • Page 29: Component Location Guide

    COMPONENT LOCATION GUIDE <MAIN> C01 ..B2 C223..G4 C373..C3 D503..G5 J94 ..F2 J198..D4 J303..A5 Q04..B2 R69..D1 R248 ..F5 R550 ..F2 C03..C3 C224 ..F4 C374..C3 D504..G3 J95..C3 J199..C4 J304 ..G3 Q05..C4 R70 ..A3 R249 ..E5 R551 ..E2 C04 ..B4 C225 ..F4 C375 ..B5 D505..G3 J96..C3 J200..E5...
  • Page 30 POWER 3-18...
  • Page 31 AV(20”) AV(14”) 3-19...
  • Page 32 SECTION 4 MECHANISM PART TVCR SERVICE MANUAL CONTENT Deck Mechanism Disassembly ....4-1 Mechanism Adjustment ......4-15 Maintenance/Inspection Procedure ..4-22 Mechanism Troubleshooting Guide ..4-23 Exploded Views ..........4-28 CHASSIS : MV-031A MODEL : KE/KL-20/21P32X MODEL : KF-20/21P32 MODEL...

  • Page 33: Top View

    DECK MECHANISM PARTS LOCATIONS • Top View Procedure Fig- Part Fixing Type Starting 1 Drum Assembly 3 Screw 2 Plate Top 2 Hook 3 Holder Assembly CST Chassis Hole 4 Opener Door Chassis Hole 5 Bracket Assembly 3 Hook L/D Motor 2,3,4 6 Gear Assembly Rack F/L 1 Hook, Chassis Hole A-2...
  • Page 34 DECK MECHANISM DISASSEMBLY Stator (S2) (S2) (S3) Drum Motor (S3) Rotor Drum Sub Assembly (Fig. A-1-1) Drum FPC Carbon Brush (S1) (S1) (S1) Holder FPC Fig. A-1 (Fig. B-1) 1. Drum Assembly (Fig. A-1-1) 1) Unplug the Drum FPC Connector. 2) Remove three Screws(S1) on bottom side and separate the Drum assembly.
  • Page 35 DECK MECHANISM DISASSEMBLY (Fig. A-2-1) Plate Top (B') (Fig. A-2-2) Holder Assembly CST (Fig. A-2-6) Arm Assembly F/L (C1) (Fig. A-2-7) Lever Assembly S/W (H8) Bracket Assembly L/D Motor Spring Lever S/W (Fig. A-2-4) (C') (E') Opener Door (Fig. A-2-3) (H6) Chassis Gear Assembly Rack F/L...
  • Page 36 DECK MECHANISM DISASSEMBLY 2. Plate Top (Fig. A-2-1) 2) Unhook three Hooks(H3, H4, H5) on bottom side of the Chassis, lift up the Bracket Assembly L/M and disassem- 1) Pull the (B) portion of the Plate Top back in direction of ble the Bracket Assembly L/D Motor.
  • Page 37 DECK MECHANISM DISASSEMBLY Arm Assembly Cleaner (Fig. A-3-1) (S4) Base Assembly A/C Head (Fig. A-3-3) Head F/E (Fig. A-3-2) Chassis Fig. A-3 9. Arm Assembly Cleaner (Fig. A-3-1) 11. Base Assembly A/C Head (Fig. A-3-3) 1) Breakaway the (A) portion as Fig. A-3-1 from the 1) Remove the Screw(S4) and lift the Base Assembly A/C embossing of the Chassis, turn the Arm assembly Head up.
  • Page 38 DECK MECHANISM DISASSEMBLY Arm Assembly Tension (Fig. A-4-3) (H11) Spring TB Brake Assembly T (Fig. A-4-1) Spring Tension Reel S Reel T (Fig. A-4-4) (Fig. A-4-4) Spring RS Brake Assembly RS (Fig. A-4-2) (H12) (H9) (H10) Base Tension Chassis Fig. A-4 12.
  • Page 39 DECK MECHANISM DISASSEMBLY Opener Lid (Fig. A-5-2) Assembly Pinch (Fig. A-5-3) Base Assembly P4 Lever T/up (H13) (Fig. A-5-1) (Fig. A-5-4) (H13) Arm T/up (Fig. A-5-5) Chassis Fig. A-5 16. Base Assembly P4 (Fig. A-5-1) NOTE 1) Breakaway the (A) portion of the Base Assembly P4 from When reassembling, confirm the (C) portion of the Arm the embossing of the Chassis.
  • Page 40 DECK MECHANISM DISASSEMBLY Belt Capstan (Fig. A-6-1) Motor Capstan (Fig. A-6-2) Washer(W1) Clutch Assembly D35 (Fig. A-6-4) (L1) (L1) Brake Assembly Capstan (Fig. A-6-5) Lever F/R (Fig. A-6-3) (L2) Chassis (S5) Fig. A-6 20. Belt Capstan (Fig. A-6-1)/ 22. Clutch Assembly D35 (Fig. A-6-4) Motor Capstan (Fig.
  • Page 41 DECK MECHANISM DISASSEMBLY (H14) Gear Cam Hole(B) Gear Cam (Fig. A-7-2) Gear Drive Hole(A) Washer (W2) Gear Sector (Fig. A-7-3) Plate Slider Gear Drive (Fig. A-7-4) (Fig. A-7-1) Lever Tension (Fig. A-7-5) Lever spring (L3) (Fig. A-7-6) Gear Drive Hole(C) Base Loading (H15) (H16)
  • Page 42 DECK MECHANISM DISASSEMBLY Gear Assembly P2 Hole Gear Assembly P3 Hole Gear Assembly P3 (Fig. A-8-2) Gear Sector Hole(A) Lever Spring Boss Gear Assembly P2 Plate Slider Hole(B) (Fig. A-8-1) Chassis Base Assembly P3 (Fig. A-8-4) Base Assembly P2 (Fig. A-8-3) Fig.
  • Page 43 DECK MECHANISM DISASSEMBLY (S7) Base Tension Base Loading (Fig. A-9-2) Arm Assembly Idler (Fig. A-9-1) (Fig. A-9-3) Chassis Fig. A-9 31. Base Loading (Fig. A-9-1) 33. Arm Assembly Idler (Fig. A-9-3) 1) Remove the Screw(S7). 1) Make narrower the two parts, (A) and (B), as Fig. A-9-3. 2) Lift the Base Loading up.
  • Page 44 DECK MECHANISM ADJUSTMENT • Tools and Fixfures for Service 1. Cassette Torque Meter 2. Alignment Tape 3. Torque Gauge SRK-VHT-303(Not SVC part) Parts No NTSC: DTN-001 600g.Cm ATG Parts No: D00-D006 PAL:DTN-0002 Parts No:D00-D002 4. Torque Gauge Adaptor 5. Post Height Adjusting Driver 6.
  • Page 45 DECK MECHANISM ADJUSTMENT 1. Mechanism Alignment Position Check Purpose:To determine if the Mechanism is in the correct position, when a Tape is ejected. Test Conditions (Mechanism Test Equipment/ Fixture Check Point Condition) • Mechanism and Mode Switch Position • Blank tape •...
  • Page 46 DECK MECHANISM ADJUSTMENT 2. Preparation for Adjustment (To set the cassette without tape. Cover the holes of the End Sensors at the both sides of Deck Mechanism of the loading state the Chassis to prevent a light leak. without inserting a cassette tape). Then the Deck Mechanism drives to the Stop Mode.

  • Page 47: Osc

    DECK MECHANISM ADJUSTMENT 4.Guide Roller Height Adjustment Purpose: To regulate the height of the tape so that the bottom of the tape runs along the tape guide line on the Lower Drum. 4-1. Preliminary Adjustment Test Equipment/ Fixture Test Conditions (Mechanism Condition) Adjustment Point •...
  • Page 48 DECK MECHANISM ADJUSTMENT 5. Audio/Control (A/C) Head Adjustment Purpose: To insure that the tape passes accurately over the Audio and Control Tracks in exact alignment of the both Record and Playback Modes. 5-1. Preliminary Adjustment (Height and Tilt Adjustment) Perform the Preliminary Adjustment, when there is no Audio Output Signal with the Alignment Tape. Test Equipment/ Fixture Test Conditions (Mechanism Condition) Adjustment Point...
  • Page 49 DECK MECHANISM ADJUSTMENT 5-2. Confirm that the tape passes smoothly (2) If folding or curling is observed at the top of it then slowly turn the Tilt Adjustment Screw(C) in the between the Take-up Guide and Pinch counterclockwise direction. Roller(using a mirror or the naked eye). 1) After completing Step 5-1.(Preliminary Adjustment), check NOTE: that the tape passes around the Take-up Guide and Pinch...
  • Page 50 DECK MECHANISM ADJUSTMENT 7. Adjustment after Replacing Drum Assembly (Video Heads) Purpose: To correct for shift in the Roller Guide and X value after replacing the Drum. Test Conditions Test Equipment/ Fixture Connection Point Adjustment Points (Mechanism Condition) • CH-1: PB RF Envelope •...
  • Page 51 MAINTENANCE/INSPECTION PROCEDURE 1. Check before starting repairs The following faults can be remedied by cleaning and oil- ing. Check the needed lubrication and the conditions of cleanliness in the unit. Check with the customer to find out how often the unit is used, and then determine that the unit is ready for inspec- tion and maintenance.
  • Page 52 MAINTENANCE/INSPECTION PROCEDURE 2. Required Maintenance 4. Supplies Required for Inspection and Maintence The recording density of a VCR(VCP) is much higher than that of an audio tape recorder. VCR(VCP) components must (1) Grease : Kanto G-311G (Blue) or equivalent be very precise, at tolerances of 1/1000mm, to ensure com- (2) Isopropyl Alcohol or equivalent patibility with the other VCRs.
  • Page 53 MAINTENANCE/INSPECTION PROCEDURE 5-2) Greasing (2) Periodic greasing Grease specified locations every 5,000 hours. (1) Greasing guidelines 1) Loading Path Inside & Top side 6) Plate Slider Guide Sections Apply grease, with a cleaning patch. Do not use excess 2) Base Assembly P2,P3 stopper 7) Plate Slider Guide Sections grease.
  • Page 54 MAINTENANCE/INSPECTION PROCEDURE Lever, F/R, Base, Tension GEAR AY, P2 & P3 Boss Lever, F/R Base, Tension Clutch (G-754. Yellow) Arm Tension Guide Hole 4-22...
  • Page 55 MECHANISM TROUBLESHOOTING GUIDE 1.Deck Mechanism Auto REW doesn't work. Is the output of END sensor of supply side "H"? “H”: more than 3.5V “L”: less than 0.7V~1V Is the Vcc. voltage of End Check the syscon power. sensor 5V? Replace the End sensor. Is the voltage across IR LED Replace the IR LED.
  • Page 56 MECHANISM TROUBLESHOOTING GUIDE AUTO STOP. (PLAY/CUE/REV) Check alignment positions (page 4-14). In Play/Cue/Rev, Is the Pinch Roller in contact with the Is the output of DFG, DPG OK? Replace the Drum Motor. Capstan Shaft? Are there T/up and Supply Reel Check the Servo, Syscon.
  • Page 57 MECHANISM TROUBLESHOOTING GUIDE In PB mode Tape Presence not sensed. Is the Pinch Roller attached Check Alignment positions to the Capstan Motor Shaft? (page 4-14). Does the T/Up Reel turn? Is the Belt ok? Replace the Belt. Check the Clutch and Idler Does the Capstan Motor turn? Assembly.
  • Page 58 MECHANISM TROUBLESHOOTING GUIDE 2. Front Loading Mechanism Cassette cannot be inserted. Does the Lever Assembly Is the Lever Assembly Switch Replace or add the Lever Switch work? Spring damaged or omitted? Assembly Switch Spring. Does the CST IN Switch work Replace the CST IN Switch.
  • Page 59 MECHANISM TROUBLESHOOTING GUIDE Cassette does not load. Does the cassette insert? Does the Opener Lid work? Does the Gear Assembly Rack F/L Replace the Opener Lid. work? Replace the Gear Rack F/L. Does the Opener Door work? Check the opener Door assembled Does the Arm Assembly F/L work? correctly.

  • Page 60: Exploded Views

    EXPLODED VIEWS 1. Front Loading Mechanism Section 4-28...
  • Page 61 EXPLODED VIEWS 2. Moving Mechanism Section(1) OPTIONAL PART 4-29...
  • Page 62 EXPLODED VIEWS 3. Moving Mechanism Section(2) 4-30...
  • Page 64 SECTION 5 TVCR SERVICE MANUAL CONTENT MECHANICAL PARTS ........5-2 ELECTRICAL PARTS ........5-4 CHASSIS : MV-031A MODEL : KE/KL-20/21P32X MODEL : KF-20/21P32 MODEL...

  • Page 65: Replacement Parts List

    REPLACEMENT PARTS LIST 1. Mechanical Section LOCA.NO PART NO DESCRIPTION SPECIFICATION REMARKS ASSEMBLY PARTS SECTION 6721R-0710C DECK ASSY D35(N),DI(2HD,NP,AHC(X),B/ 6723R-D401B DRUM(CIRC) ASSY D35-2CH SP/EP (8M2) 4811R-0038A BRACKET ASSY 4811R-0038B BRACKET ASSY GEAR ASSY 4471R-0005A 4471R-0004A GEAR ASSY 4931R-0047A HOLDER ASSY GEAR ASSY RACK F/L 4471R-0006A...
  • Page 66 LOCA.NO PART NO DESCRIPTION SPECIFICATION REMARKS 4510R-0040A LEVER F/R(D35) 4265R-0006A CLUTCH ASSY D35(N) GEAR SECTOR(D35) 4470R-0098A 4510R-0047A LEVER SPRING 3300R-M116A PLATE SLIDER 4510R-0041A LEVER TENSION 3040R-0056A BASE TENSION(D-35) PLATE ASSY 3301R-M022A 5870R-0004A OPENER STOPPER 4260R-0035A DOOR 3070R-0002A BODY 4970R-0127A SPRING COIL D35(F/L(R)) 4260R-0036A F/L(R)
  • Page 67 REPLACEMENT PARTS LIST LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION D507 0DD414809ED DIODE,SWITCHING 1N4148 TP GRANDE D510 0DD414809ED DIODE,SWITCHING 1N4148 TP GRANDE 0ICTMHY017A IC01 IC,LG8037-02A HYNIX 100P QFP TRAY MV-031A E/D/F D511 0DD414809ED DIODE,SWITCHING 1N4148 TP GRANDE “...
  • Page 68 For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film in the P/No. means as follows; CE : Electrolytic RN : Metal Film RF : Fusible LOCA.
  • Page 69 For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film in the P/No. means as follows; CE : Electrolytic RN : Metal Film RF : Fusible LOCA.
  • Page 70 1200P 2KV K B S P202 387-A04E CONNECTOR,4P 2.5MM 300MM C904 4.7UF STD 250V 20% FL TP 5 0CE475DR618 P21J 366-932C CONNECTOR,2.5MM 4P GIL-G LG CABLE C905 0CN5610K519 560P 50V K B TA52 P22J 366-932B CONNECTOR,2.5MM 3P GIL-G LG CABLE C906 0CE107DF618...
  • Page 71 5.1K OHM 1/6 W 5.00% TA52 P803 366-043B CONNECTOR ASSY,PLUG(2P) R221 0RD5101F609 5.1K OHM 1/6 W 5.00% TA52 P804 6602V25004L CONNECTOR,2.5MM 12P GT250 LG CABLE S R221 0RD5101F609 5.1K OHM 1/6 W 5.00% TA52 P804A 6631V25017G CONNECTOR,12P 2.5MM 400MM R224 0RD1001F609...
  • Page 72 For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film in the P/No. means as follows; CE : Electrolytic RN : Metal Film RF : Fusible LOCA.
  • Page 73 10K OHM 1/6 W 5% TA52 3828VA0315A MANUAL,OWNERS EU LG EN 032C/E TX R884 0RD6202F609 62K OHM 1/6 W 5.00% TA52 3828VA0315J MANUAL,OWNERS FS LG FR 032C/E TX 335A 0RD2200F609 3828VA0315B 220 OHM 1/6 W 5.00% TA52 MANUAL,OWNERS DG LG GE/FR/NE/EN R903 0RD2200F609 220 OHM 1/6 W 5.00% TA52...
  • Page 74 P/No : 3854VA0110A-S(1/2) 2003.03.14...
  • Page 75 P/No : 3854VA0110A-S(2/2) 2003.03.14...

This manual is also suitable for:

Ke-21p32xKf-20p32Kr-20p32xKr-21p32xKf-21p32

Table of Contents