Advertisement
Philips Semiconductors
24 W BTL or 2 x 12 W stereo car radio
power amplifier
Notes to the characteristics
1. If V
> V
then I
11
10
11
2. Closed loop voltage gain can be chosen between 32 and 56 dB (BTL), and is determined by external components.
3. Frequency response externally fixed.
4. The input impedance in the test circuit (Fig.3) is typ. 100 k .
5. Supply voltage ripple rejection measured with a source impedance of 0
6. Output power is measured directly at the output pins of the IC.
7. Closed loop voltage gain can be chosen between 26 and 50 dB (stereo), and is determined by external components.
8. A resistor of 56 k between pins 3 and 7 is required for symmetrical clipping.
9. Without bootstrap the 100 F capacitor between pins 5 and 6 and the 100 F capacitor between pins 8 and 9 can
be omitted. Pins 6 and 8 connected to pin 10.
January 1992
must be < 10 mA.
(maximum ripple amplitude 2 V).
8
Product specification
TDA1510AQ
Advertisement
