Yamaha AX-497 Owner's Manual page 12

CONNECTIONS
CAUTION
• Do not connect this unit or other components to the main power until all connections between components are
complete.
• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could
damage this unit and/or the speakers.
• All connections must be correct: L (left) to L, R (right) to R,
"+"
to
"+"
and "-" to "_". If the connections are faulty,
no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be
unnatural and lack bass. Also, refer to the owner's manual for each of your components.
• Use RCA type pin plug cables for audio/video units except speakers.
• Connect your turntable to the GND terminal to reduce noise in the signa1. However, you may hear less noise without
the connection to the GND terminal for some record players.
8
Turntable
B
.----..L...--A...,"1~'~=Jd;8"d;O
001
CD player or VCR, etc. MD recorder,
DVD player etc.
Speakers A
Speakers B