Bosch GSH 5 CE Professional Original Instructions Manual page 12

OBJ_BUCH-419-008.book Page 12 Wednesday, November 28, 2012 1:59 PM
12 | English
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for chiselling work in concrete, brick,
masonry and asphalt as well as for driving in and compacting,
when using the respective accessories.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Dust protection cap
2 Locking sleeve
3 Chisel adjustment ring (Vario-Lock)
4 Vibration damper
5 Handle (insulated gripping surface)
6 On/Off switch
7 Thumbwheel for preselection of impact rate
8 Service indicator
9 Stand-by indicator
10 Auxiliary handle (insulated gripping surface)
11 Knurled nut for auxiliary handle
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Technical Data
Demolition Hammer
Article number
Rated power input
Impact rate
Impact energy per stroke accord-
ing to EPTA-Procedure 05/2009
Chisel positions
Tool holder
Lubrication
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
1 609 92A 03V | (28.11.12)
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 86 dB(A); sound power level 98 dB(A).
Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
Chiselling: a
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC, 2000/14/EC.
2000/14/EC: Guaranteed sound power level 105 dB(A).
Conformity assessment procedure according to Annex VI.
Equipment category: 10
GSH 5 CE
Notified body:
3 611 C21 0..
TÜV NORD CERT GmbH & Co. KG,
W 1150
Am TÜV 1, 30519 Hannover
-1
min 1300– 2900
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
J 8.3 D-70745 Leinfelden-Echterdingen
12 Dr. Egbert Schneider
Senior Vice President
SDS-max
Engineering
Central
permanent
lubrication
Robert Bosch GmbH, Power Tools Division
kg 6.2
D-70745 Leinfelden-Echterdingen
/II
Leinfelden, 30.11.2012
(triax vector sum) and uncertainty K
h
2 2
= 11 m/s , K= 1.5 m/s .
h
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools