Hyundai H-1549 Instruction Manual page 4

Instruction manual
temperature. The temerature indicatoin will be
on for 5 seconds, then the display returns to
initial mode. Press and hold TEMP/
to switch between Celsius and Fahrenheit
temperature modes.
Bottom backlight
To switch on/off the backlight of the unit
bottom, press LIGHT ON/OFF button.
Line input
• You can connect the audio output of an
external device to this unit, to listen to the
sound of that device through the amplifier of
this unit.
• To connect an external audio device (eg.
MP3 player), please use a standard stereo
cable (not included) with 3.5 mm to 3.5 mm
plugs to connect the headphone out or audio
line-out of the external device to the Line input
socket of this unit.
Radio operation
Tuner operations
• Press button to turn the radio on or off.
• Press BAND button to switch between AM
and FM radio bands.
• Adjust the program by rotating TUNE
regulator. Use VOLUME regulator to adjust
volume level.
• To obtain better FM signal reception,
extend the FM wire antenna to its full length.
• The AM signal is picked up through the
built-in antenna. The unit should be placed to a
position for the best reception.
Sleep to music
• In Radio mode, press SNOOZE/SLEEP
button to turn on sleep mode. The default sleep
time of 90 minutes will be set. Press this button
repeatedly to select 60, 30 or 15 minutes of
sleep time period. The figures will blink on
the display for 5 seconds. "SLEEP" will be
displayed meaning that the sleep function is
4
activated. The radio will turn off automatically
after the preset time period elapses.
button • To cancel the sleep function, press
button.
Alarm operation
Setting the alarm
• Press and hold AL.SET button. Press
it repeatedly to cycle through alarm settings
in following order: Alarm 1 hours => Alarm 1
minutes => Alarm 1 weekend => Alarm 2 hours
=> Alarm 2 minutes => Alarm 2 weekend. The
selected setting will blink.
• Press repeatedly TEMP/
press and hold it to decrease the setting; press
repeatedly Y-M-D/
it to increase the setting.
• In normal mode, press repeatedly AL.SET
button to show the alarm settings.
• Slide DIMMER switch to AUTO OFF
position. After 15 seconds the display will
switch off and it will resume when the preset
alarm time comes.
Alarm signal selection
Press repeatedly AL.1 button (for Alarm 1)
or AL.2 button (for Alarm 2) to select alarm
sound. Press once to select buzzer (
be on), press twice to select radio (
on), press thrice to disable alarm signal (no
indication will be on).
Snooze control
• When the alarm time comes, the signal will
sound for 30 minutes if no button is pressed.
After that the sound will mute and start at the
same time the following day.
• When the alarm is on, press SNOOZE/
SLEEP button to interrupt the alarm signal.
After 9 minutes the alarm will be on again.
• If you want to stop the alarm, press
button. The alarm will resume in 24 hours.
button or
button or press and hold
will
will be