Advertisement
User instructions
SPREAD HALF LOAD
(not compatible with the soak program)
When there are not many dishes to be washed, the "spread half load"
option, controlled by the button is useful to save water and electricity and
reduces the program's duration. Spread dishes across both baskets; the
detergent dispenser should be loaded with less than the normal amount
for a full load.
Flexi Tabs
Specifically for washing with combination detergents in tablets, which also
contain salt and rinse aid (3in1) or other agents such as glass protector,
steel rinse aids, etc. (4in1, 5in1...). When this option is selected, salt and
rinse aid will not be dispensed even if the relative compartments are
loaded. If the containers are empty, the lights will remain on.
If this option is not provided with your dishwasher, we recommend the
use of conventional products (separate detergent, salt and rinse aid),
because with conventional wash cycles, combined products might create
problems such as a white deposit, poor drying results and residues on
dishes.
For further information, refer to the detergent pack.
IMPORTANT:
when no longer required, the option must be deactivated by pressing the
corresponding button (the light will turn off).
These products are not suitable for use with excessively "hard" water.
If the hardness level set is higher than H3, when the option is activated
the relative light flashes to indicate that the product is being used
incorrectly; the dishwasher will still work, but wash results may not be
ideal.
18
Hide quick links:
Advertisement
