Advertisement
Information shown on front display
End of cycle message
Estimated wash cycle duration and
time remaining
Delayed start information
Error message
Softener setting
Program phase icons.
They indicate the program status when a
program is running
N.B.:
-
With the door open, the display switches off after about 10 seconds
with no commands.
-
With the door closed, if the dishwasher is programmed but the start
is not confirmed (cycle not confirmed, program interrupted, start not
confirmed...) the name smeg appears on the display after about
10 seconds.
WASH PROGRAM SELECTION AND SWITCHING-ON
For selection of the most suitable program for the dishes to be washed,
refer to the table below, which specifies the recommended type of wash,
also considering the type of dishes and the degree of soiling.
12
User instructions
End
01: 55
Start in "X" hours
Error 01 ......11
h.3
Prewash
Wash
Rinse
Drying
Hide quick links:
Advertisement
