Hide thumbs Also See for XP-SN70:

Advertisement

Quick Links

SERVICE MANUAL
Ver 1.1 2003. 10
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wavelength: λ = 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance
of 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
D-A conversion
1-bit quartz time-axis control
Frequency response
+1
20 - 20 000 Hz
dB (measured by JEITA CP-
–2
307)
Output (at 4.5 V input level)
Headphones (stereo minijack):
Approx. 5 mW + Approx. 5 mW at 16 Ω
Power requirements
For the area code of the model you
purchased, check the upper left side of the
bar code on the package.
• Two LR6 (size AA) batteries: 1.5 V DC × 2
• AC power adaptor (DC IN 4.5 V jack):
US, Canadian models: 120V, 60Hz
AEP, MX models
: 100-240V, 50/60Hz
Sony Corporation
9-961-142-02
2003J16-1
Personal Audio Company
© 2003.10
Published by Sony Engineering Corporation
Model Name Using Similar Mechanism NEW
CD Mechanism Type
Optical Pick-up Name
SPECIFICATIONS
1
Battery life*
(approx. hours)
(When you use the CD player on a flat and stable
surface)
Playing time varies depending on how the CD
player is used.
When using two Sony alkaline batteries
LR6 (SG) (produced in Japan)
E•A•S•S GP
1
Audio CD
50
2
ATRAC3plus files*
3
MP3 files*
*1 Measured value by the standard of JEITA
(Japan Electronics and Information Technology
Industries Association)
*2 When recorded at 48 kbps or 64 kbps
*3 When recorded at 128 kbps
XP-SN70
Canadian Model
Operating temperature
5°C - 35°C (41°F - 95°F)
Dimensions (w/h/d) (excluding
projecting parts and controls)
Approx. 133 × 34 × 151 mm
× 1
× 6 in.)
1
3
(5
4
8
Mass (excluding accessories)
Approx. 341 g (12.0 oz.)
2
Headphones (1)
45
Hand strap (1)
77
AC power adaptor* (1)
CD-ROM (SonicStage Simple Burner)** (1)
72
* Not supplied with the U model. For the area
code of the model you purchased, check the
upper left side of the bar code on the package.
** Do not play a CD-ROM on an audio CD player.
Design and specifications are subject to change
without notice.
• Abbreviation
MX
: Mexican model
PORTABLE CD PLAYER
US Model
AEP Model
E Model
CDM-3325EK
DAX-25E

Advertisement

Table of Contents
loading

Summary of Contents for Aiwa XP-SN70

  • Page 1 XP-SN70 SERVICE MANUAL US Model Canadian Model Ver 1.1 2003. 10 AEP Model E Model Model Name Using Similar Mechanism NEW CD Mechanism Type CDM-3325EK Optical Pick-up Name DAX-25E SPECIFICATIONS System Battery life* (approx. hours) Operating temperature (When you use the CD player on a flat and stable Compact disc digital audio system 5°C - 35°C (41°F - 95°F)
  • Page 2: Table Of Contents

    XP-SN70 TABLE OF CONTENTS This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. 1. SERVICING NOTE ·························································· 3 2. GENERAL ·········································································· 5 3. DISASSEMBLY 3-1. CABINET (UPPER) SUB ASSY, PANEL (UPPER) LID ASSY ········································...
  • Page 3: Servicing Note

    XP-SN70 SECTION 1 SERVICING NOTE BEFORE REPLACING THE OPTICAL PICK-UP BLOCK NOTES ON HANDLING THE OPTICAL PICK-UP Please be sure to check thoroughly the parameters as par the “Optical BLOCK OR BASE UNIT Pick-Up Block Checking Procedures” (Part No.: 9-960-027-11) issued separately before replacing the optical pick-up block.
  • Page 4 XP-SN70 TEST MODE The software version display and LCD test can be performed when the test mode is activated. Procedure: 1. Confirm the set is not powered on. (Remove two batteries and disconnect the AC power adaptor.) 2. Short the solder land SL806 (TEST) on the MAIN board.
  • Page 5: General

    XP-SN70 SECTION 2 GENERAL This section is extracted from instruction manual. Locating the controls CD player (front) FOLDER SKIP +/– buttons u* (play/pause) button (page 12) (pages 11, 12, 16, 18, 19) x (stop) button (pages 12, 22) DISPLAY button (pages 20, 21) ./>...
  • Page 6: Disassembly

    XP-SN70 SECTION 3 DISASSEMBLY Note : Disassemble the unit in the order as shown below. CABINET (UPPER) SUB ASSY, PANEL (UPPER) LID ASSY CD MECHANISM CONTROL BOARD (CDM-3325EK) MOTOR ASSY (SLED) (M902), MAIN BOARD OPTICAL PICK-UP (DAX-25E), TURN TABLE MOTOR ASSY (SPINDLE) (M901) Note : Follow the disassembly procedure in the numerical order given.
  • Page 7: Control Board

    XP-SN70 3-2. CONTROL BOARD 1 eleven screws 3 plate (control) two hooks 4 CONTROL board 3-3. CD MECHANISM (CDM-3325EK) three insulators CD mechanism (CDM-3325EK ) connector (2P) (CN401) flexible board (15P) (CN601) connector (4P) (CN402)
  • Page 8: Main Board

    XP-SN70 3-4. MAIN BOARD 1 battery terminal (-) 3 MAIN board When installing it, align the switch position as shown. 2 battery terminal (+) S810 3-5. MOTOR ASSY (SLED)(M902), OPTICAL PICK-UP (DAX-25E), TURN TABLE MOTOR ASSY (SPINDLE)(M901) 1 three screws (B1.7x4)
  • Page 9: Electrical Checking

    XP-SN70 SECTION 4 ELECTRICAL CHECKING The CD section adjustments are done automatically in this set. RF Level Check In case of operation check, confirm that RF level. Condition: • Hold the set in horizontal state. Precautions for Check Perform check in the order given.
  • Page 10: Diagrams

    XP-SN70 SECTION 5 DIAGRAMS NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS Note on Printed Wiring Board Note on Schematic Diagram: • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or • X : parts extracted from the component side.
  • Page 11: Block Diagram

    XP-SN70 5-1. BLOCK DIAGRAM IC601 DSP,DSSP,DAC, DRAM CONTROLLER IC301 HEADPHONE AMP J301 AOUT1 LOUT OPTICAL PICK-UP ROUT AOUT2 DAX-25E VREF DETECTOR RFAC LRMU MUTE RFDC PWRSW BEEP IC603 DRAM VCC1 (2.25V) XTAI X601 16.934MHz XTAO Q601 IC403(1/2) VCC0 SWITCH COIL/MOTOR 11 .
  • Page 12: Main Board (Side A)

    XP-SN70 Ver 1.1 2003.10 5-2. PRINTED WIRING BOARDS – MAIN BOARD (SIDE A) – • : Uses unleaded solder. MAIN BOARD (SIDE A) TP630 TP950 TP628 TP629 R633 C630 C618 R637 R632 R605 R604 TP949 TP826 TP627 R628 R665 R617...
  • Page 13: Printed Wiring Boards

    XP-SN70 • : Uses unleaded solder. 5-3. PRINTED WIRING BOARDS – MAIN BOARD (SIDE B) – MAIN BOARD (SIDE B) CONTROL BOARD CN1101 (Page 18) TAP805 TP821 C808 R865 R922 CN808 R920 R901 OPTICAL IC603 PICK-UP BLOCK TP942 (DAX-25E) TP938...
  • Page 14: Main Board (1/4)

    XP-SN70 5-4. SCHEMATIC DIAGRAMS – MAIN BOARD (1/4) – • See page 10 for Waveforms. • See page 20 for IC Block Diagrams. C620 C621 R612 100p 47 6.3V FB601 C696 X601 16.934MHz C619 6.3V C627 C626 R636 TP952 L602...
  • Page 15: Main Board (2/4)

    XP-SN70 5-5. SCHEMATIC DIAGRAMS – MAIN BOARD (2/4) – • See page 10 for Waveforms. • See page 20 for IC Block Diagrams. IC301 TA2120FN(EL) C308 R318 C107 R102 TP938 R101 TP937 TP930 TP935 100k C307 C309 TP943 TP939 R301...
  • Page 16: Main Board (3/4)

    XP-SN70 5-6. SCHEMATIC DIAGRAMS – MAIN BOARD (3/4) – • See page 10 for Waveforms. L406 L409 C435 C403 R424 R429 470p 6.3V R489 C438 L411 TP902 R416 R460 R440 R427 C427 100k C458 Q402 VDR404 2SB1237TV2PQR TP423 R430 TP424...
  • Page 17: Main Board (4/4)

    XP-SN70 Ver 1.1 2003.10 5-7. SCHEMATIC DIAGRAMS – MAIN BOARD (4/4) – • See page 10 for Waveforms. IC806 XC6206P152MR TP917 R1001 470k C810 TAP805 C821 S820 C808 4700p TP826 OPEN FB408 S810 C897 R866 TP822 HOLD R898 S811 TP821...
  • Page 18: Control Board

    XP-SN70 5-8. PRINTED WIRING BOARDS – CONTROL BOARD – • : Uses unleaded solder. CONTROL BOARD R1102 R1104 MAIN BOARD CN1101 R1101 R1118 CN808 (Page 13) S1108 S1104 FOLDER SKIP C1105 C1104 C1101 C1103 R1126 R1125 S1105 S1101 S1109 LCD401...
  • Page 19: Control Board

    XP-SN70 5-9. SCHEMATIC DIAGRAMS – CONTROL BOARD – S1101 R1103 S1102 R1102 R1115 S1103 R1104 R1101 2.2k 4.7k S1104 R1126 R1125 R1124 R1123 R1105 LCD401 470k 100k 2.2k CN1101 S1105 R1107 R1106 4.7k C1103 R1108 R1109 4.7k C1101 R1110 R1111...
  • Page 20: Ic Block Diagrams

    XP-SN70 5-10. IC BLOCK DIAGRAMS IC301 TA2120FN (EL) IC701 CXR712160-203R BIASI BIAS MUTE MUTEC BEEP BSTO BIAS BEEP 64 63 62 61 60 59 58 57 56 55 52 51 50 49 ROUT LOUT ADDO RF IN OCL ROUT VREF...
  • Page 21: Ic Pin Function Descriptions

    XP-SN70 5-11. IC PIN FUNCTION DESCRIPTIONS • IC801 TMP91CW28FG (SYSTEM CONTROLLER) Pin No. Pin Name Description — Reference voltage terminal (A/D converter) — Ground terminal (A/D converter) VCPU — Power supply terminal (A/D converter) XRST_O Reset signal output to the DSP (IC601)
  • Page 22 XP-SN70 Pin No. Pin Name Description BAT_VCC_O Battery power switch control signal output (not used (open)) DTS_RST_O Not used (open) AT3_MP3_V_O Reset signal output to the decoder (IC701) P/S_O P/S signal output to the LCD unit — Ground terminal XNMI_I Not used (fixed at “H”)
  • Page 23: Exploded Views

    XP-SN70 Ver 1.1 2003.10 SECTION 6 EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may • The mechanical parts with no reference number The components identified by mark 0 or have some differences from the original one.
  • Page 24: Cabinet (Lower) Section

    XP-SN70 Ver 1.1 2003.10 6-2. CABINET (LOWER) SECTION supplied supplied supplied supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-256-548-01 PANEL (LOWER)(US) X-3383-837-1 LOCK ASSY, OPEN 3-256-548-11 PANEL (LOWER)(CND) 3-256-551-01 RUBBER (HEADPHONE JACK) X-3383-874-1 KEY (OPEN) ASSY...
  • Page 25: Cd Mechanism Section (Cdm-3325Ek)

    XP-SN70 6-3. CD MECHANISM SECTION (CDM-3325EK) M901 M902 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-318-203-61 SCREW (B1.7X4), TAPPING 3-221-475-01 SHAFT, STANDARD 0 102 X-3380-950-1 OPTICAL PICK-UP (DAX-25E) 3-222-298-01 RACK 3-221-473-01 COVER, GEAR 3-222-299-01 SPRING, RACK RETAINER 3-221-472-02 CHASSIS 3-348-998-31 SCREW (M1.4X2.5), TAPPING, PAN...
  • Page 26: Electrical Parts List

    XP-SN70 Ver 1.1 2003.10 SECTION 7 CONTROL MAIN ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • RESISTORS • SEMICONDUCTORS In each case, u: µ, for example: parts list may be different from the parts All resistors are in ohms.
  • Page 27 XP-SN70 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C422 1-164-937-11 CERAMIC CHIP 0.001uF 10.00% 50V C702 1-119-750-11 TANTAL. CHIP 22uF 20.00% 6.3V C423 1-164-937-11 CERAMIC CHIP 0.001uF 10.00% 50V C703 1-107-820-11 CERAMIC CHIP 0.1uF C425 1-128-964-91 TANTAL.
  • Page 28 XP-SN70 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks FB406 1-216-864-11 METAL CHIP 1/16W < RESISTOR > FB407 1-216-864-11 METAL CHIP 1/16W R101 1-218-990-11 SHORT CHIP FB408 1-414-760-21 FERRITE R102 1-218-977-11 RES-CHIP 100K 1/16W FB409...
  • Page 29 XP-SN70 Ver 1.1 2003.10 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R618 1-218-957-11 RES-CHIP 2.2K 1/16W R709 1-218-977-11 RES-CHIP 100K 1/16W R619 1-218-957-11 RES-CHIP 2.2K 1/16W R621 1-218-965-11 RES-CHIP 1/16W R710 1-218-977-11 RES-CHIP 100K...
  • Page 30 XP-SN70 Ver 1.1 2003.10 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R886 1-218-977-11 RES-CHIP 100K 1/16W MISCELLANEOUS R887 1-218-990-11 SHORT CHIP ************** R894 1-218-965-11 RES-CHIP 1/16W 1-827-460-11 CABLE, FLEXIBLE FLAT (22P) 0102 X-3380-950-1 OPTICAL PICK-UP (DAX-25E)
  • Page 31 XP-SN70 MEMO...
  • Page 32 XP-SN70 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2003.08...

Table of Contents