Page 1
Re-issuing is under r equest. • This Service Manual is the “Revision Publishing” and replace “Simple Manual” XP-SR320/SR321<AU>, (S/M Code No. 09-014-443-7T1). • This Service Manual does not include “TEST MODE”. This item will be issued in the next supplement.
http://www.xiaoyu163.com PROTECTION OF EYES FROM LASER BEAM DURING SERVICING 3 7 63 1515 0 CAUTION This set employs laser. Therefore, be sure to follow carefully the instructions below when servicing. Use of controls or adjustments or performance of proce- dures other than those specified herin may result in WARNING!! hazardous radiation exposure.
http://www.xiaoyu163.com ELECTRICAL MAIN PARTS LIST 3 7 63 1515 0 REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION C303 87-A11-057-080 C-CAP,U,0.1-16 K B C304 87-012-286-080 CAP, U 0.01-25 87-A21-448-040 C-IC,BH6554FV C305 87-012-286-080 CAP, U 0.01-25 87-A21-874-010 C-IC,MN35530 C307 87-012-274-080...
Page 16
http://www.xiaoyu163.com IC DESCRIPTION IC, MN35530 3 7 63 1515 0 Pin No. Pin Name Description DVDD3 DRAM interface power (terminal No. 2 to 19). 2 ~ 3 D0 ~ D1 DRAM data input/output signal 0 ~ 1. DRAM write enable signal. NRAS DRAM RAS control signal.
Page 18
http://www.xiaoyu163.com IC, MN101C439-AK 3 7 63 1515 0 Pin No. Pin Name Description 1 ~ 7 Not connected. Micro-computer power voltage (2.8 V). OSC2 Not used. OSC1 Main clock oscillator (8.4 MHz). Micro-computer GND. Sub clock input. (Connected to GND) Sub clock output.
Page 19
http://www.xiaoyu163.com 3 7 63 1515 0 Pin No. Pin Name Description MUTE Audio mute output. Not connected. DSCHRG Electric discharge output. CHRG Electric charge output. Not connected. LCDRDO LCD remote control output. (Not used) Not connected. Not connected. SWDOOR Door switch. 1/13 Connected to GND.
Page 20
http://www.xiaoyu163.com IC, HD6433863A71W 3 7 63 1515 0 Pin No. Pin Name Description BATT-LEVEL BATT level input for battery level indication. AVSS – Analog GND. – Connected to GND. – Not used. – GND. XTAL2 Connection terminal to oscillator terminal. XTAL1 Connection terminal to oscillator terminal.
Page 21
http://www.xiaoyu163.com 3 7 63 1515 0 Pin No. Pin Name Description BHC-1(D)/B – BHC-1(D) / B. “H” : 1(D), “L” : B. RMC-WP Wake up for RMC. AVCC – Analog VCC. KEY-FUNC0 A / D key function 0 input. KEY-FUNC1 A / D key function 1 input.
Page 23
http://www.xiaoyu163.com ADJUSTMENT < TUNER SECTION > 3 7 63 1515 0 7. FM Tracking Check 1. Clock Adjustment Settings : • Test point : PHONES-OUT (volume max) Settings : • Test point : TP2 (CLK) Method : Set to 87.5 MHz, 108.0 MHz and check that the test •...