Servicing Notes - Sony HCD-EP30 Service Manual

HCD-EP30/EP40
QQ
3 7 63 1515 0
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
1. Press the button to the power ON with no disc inserted
I/1
[CD]
and press the button.
2. Open the lid for CD.
3. Turn on SW600 as following figure.
4. Confirm the laser diode emission while observing the object-
ing lens. When there is no emission, Auto Power Control cir-
cuit or Optical Pick-up is broken.
Objective lens moves up and down five times for the focus
search.
TE
L 13942296513
www
.
4
http://www.xiaoyu163.com
SECTION 1

SERVICING NOTES

SW600
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
• MODEL IDENTIFICATION
– Bottom View –
MODEL
EP30: AEP and UK models
US and Canadian models
Q Q
3 6 7 1 3 1 5
Singapore model
Australian model
Taiwan model
Mexican model
Argentina model
EP40: AEP and UK models
Saudi Arabia model
TO PREVENT 'TAPE OSCILLATION SOUND AT VOLUME'
MAXIMUM SETTING (W/O TAPE)
Headphone wire dressing:
a.) Draw the wire from Main board to Headphone Jack board along
the bottom side of heatsink.
b.) The wire must be kept away from the top side of Cassette board
at least 30 mm.
MAIN board
HEADPHONE
board
co
.
at least 30 mm
9 4 2 8
PART No.
PART No.
4-235-167-0
[]
4-235-169-0 []
0 5 8 2 9 9 4 2 8
4-235-170-0
[]
4-235-171-0
[]
4-235-172-0 []
4-235-173-0
[]
4-235-174-0
[]
4-235-175-0 []
4-236-316-0
[]
heatsink
m
CASSETTE board
9 9
9 9