Philips 244ESB/00 Service Manual page 69

SmartImage Lite Logo & Banner
As design to keep the LightFrame logo at header but change the name to
"SmartImage" with bitmap format.
Icon of each profile
Each profile will use text instead of icon & text before.
User Operation Procedure
A. 3 different modes are switched to next in the sequence from 1 to 3 then back
to 1 while pressing this button: 1) Standard 2) Internet 3)Game. The default
setting is 'Standard".
B. The FOS optimization will be changed in real time by which profile to be
scrolled, users don't need to confirm to enable.
C. The SmartImage Lite OSD will remain on screen for 5 seconds after user last
action. Or user can also press [MENU] to close the Smart Image OSD
immediately.
D. Except using [MENU] button to scroll down profile. If Smart Image OSD already
launched onscreen. User is allowed to use up/down key to choose profile and
press [MENU] to confirm selection and close the Smart Image OSD.
E. If the model has multiple inputs including VGA , DVI and HDMI, each input has
their own set of profiles. When user switch input, the profile to be applied will
also change.
F. Each input can memorize their individual "SmartImage Lite" profile status.
For example, SmartImage is on with "Game" profile at VGA input, when
switch to DVI input, the Smart Image will revert to previous profile of DVI.
In the input switching process the "SmartImage" OSD will also show up to present
which profile is selected if "Smart Image" is enabled at that input.
2010/05/16
General Product Specification
244E2
PHILIPS
244E2 LCD
24" Wide FHD LCD Monitor
19 of 36
69