switch to "START'. If the engine does not
start, close all doors completely or turn the
ignition switch back to the "LOCK" position,
then start the engine.
The ignition switch has the following four
positions:
LOCK (1)
This is the normal parking position. It is the
only position in which the key can be
removed. It locks the ignition, and prevents
normal use of the steering wheel.
If your vehicle is equipped with the auto-
matic transmission key inter lock system,
the ignition switch can be turned to the
"LOCK" position only when the gearshift
lever is in the "P" (Park) position.
To release the steering lock, turn the igni-
tion switch clockwise to one of the other
positions. If you have trouble turning the
ignition switch to unlock the steering, try
turning the steering wheel slightly to the
right or left while turning the switch.
NOTE:
You must push the ignition switch in
to
turn
it
to
the
'~CC"
position. Also you must
push the ignition switch in to return it
to
the
"LOCK" position.
ACC (2)
Accessories such as the radio can oper-
ate, but the engine is off.
ON (3)
This is the normal operating position. All
electrical systems are on.
START (4)
This is the position for starting the engine
using the starter motor. The switch should
be released from this position as soon as
the engine starts.
Ignition switch reminder
(When using the keyless start system)
A buzzer sounds intermittently to remind
you to return the ignition switch to the
"LOCK" position if it is in the "ACC" position
when the driver's door is opened.
Ignition key reminder
(When using the ignition key)
A buzzer sounds intermittently to remind
you to remove the ignition key if it is in the
ignition switch when the driver's door is
opened.
OPERATING YOUR VEHICLE
81A297S
A
WARNING
• Never return the ignition switch to
the "LOCK" position and remove
the ignition key while the vehicle is
moving. The steering wheel will
lock and you will not be able to
steer the vehicle.
(Continued)
3-6
Need help?
Do you have a question about the GRAND VITARA 08 and is the answer not in the manual?