Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Edision Home Modulator
Summary of Contents for Edision Home Modulator
-
Page 1: User Manual
Home Modulator AV to DVBT/C CVBS to DVB-T Encoder & Modulator - Home Use User Manual Thank you for buying this encoder modulator. Please read this manual carefully to install, use and maintain the encoder modulator in the best conditions of performance. Keep this manual for future reference. -
Page 2: Table Of Contents
CVBS to DVB-T Encoder & Modulator Directory CHAPTER 1 Product Introductions General Description System Connection Chart Technical Specifications CHAPTER 2 Safety Instruction and Installations Safety Instructions Installations CHAPTER 3 Operations and Management Appendix... -
Page 3: Chapter 1 Product Introductions
Home Use CHAPTER 1 Product Introductions General Description It is an all-in-one device integrating MPEG2 encoding and DVB-T modulating to convert video signals to DVB-T RF out for distribution network. The signals source could be from satellite receivers, closed-circuit TV, cameras, Blue-ray players, and antenna etc. -
Page 4: System Connection Chart
CVBS to DVB-T Encoder & Modulator DC 12V: power input CVBS: composited video input supporting NTSC and PAL L/R channel: Stereo Left and Right audio channels RF in: to combine input RF signal (10 dB attenuation) RF out: to distribute modulated signal (30-960 MHz, 81 ~ 97 dbµV) System Connection Chart... -
Page 5: Technical Specifications
Home Use Technical Specifications Encoding Section Encoding MPEG-2 MP@ML(4:2:0) Interface CVBS *1 Video Resolution 720x576_50i (PAL); 720x480_60i (NTSC) Bit rate 1.000 ~ 19.500 Mbps Encoding MPEG1 Layer II Interface 1*Stereo /mono Audio Sample rate 48KHz Bit rate 64, 96, 128, 192, 256, 320, 384kbps Modulator Section Standard DVB-T COFDM... - Page 6 CVBS to DVB-T Encoder & Modulator System Management Local control: LCD + control buttons Language English LCN Insertion Upgrade JTAG General Power supply DC 12V Dimensions 140*110*43mm Weight < 1kg Operation temperature 0 ~ 45℃...
-
Page 7: Chapter 2 Safety Instruction And Installations
Home Use CHAPTER 2 Safety Instruction and Installations Safety Instructions WARNING: To prevent fire or electrical shock, do not expose the device to rain or moisture. The encoder modulator is powered with a voltage of 12V DC. The power supply voltage must not exceed the recommended voltage, which otherwise may cause irreparable damage to the device and the invalidation of the warranty. -
Page 8: Installations
CVBS to DVB-T Encoder & Modulator Installations 1. Screw the encoder modulator where you want to install it. Left 10 cm of free space around from each other once the devices have been installed. 2. Connect cables to audio/video source. The signal source can be from a surveil- lance monitor, DVD, set-top box, CCTV and etc. -
Page 9: Chapter 3 Operations And Management
Home Use CHAPTER 3 Operations and Management NDS3552 is controlled and managed through the key board and LCD display. LCD Display – It presents the selected menu screen and the parameter settings. The backlight in the display is on when the power is applied. LED –... - Page 10 CVBS to DVB-T Encoder & Modulator Enter – Use this button to enter a submenu or save a new setting after adjustment; press it to start adjusting the value of certain items when the corresponding underline flash with Up and Down buttons; Press it to activate the hidden selections and change the setting with Up and Down (or Left and Right) buttons.
- Page 11 Home Use 1) DVB-T: modulating standard; XX.XXX MHz: the current output frequency; 576i: video resolution of signal source; X.XX Mbps: the current encoding bit rate 2) Alarm Status: For example, if the CVBS cable disconnected, it will display Video 1 Not Lock under this menu.
- Page 12 CVBS to DVB-T Encoder & Modulator 10) EIT: EIT Insert - As mentioned above (6), the event information table can be chosen whether to insert into the TS or not under this menu. If yes, the EIT information set above (6) will be displayed on the TV screen. Language Code – to set the EIT language For example, code of the English language is eng.
-
Page 13: Appendix
Home Use Appendix Table 1 Australia Television Frequency/Channels (MHz) - Page 14 CVBS to DVB-T Encoder & Modulator Table 2 Recommended MPEG-2 Code Rate...