S3C6410 INSTALLATION MANUAL FOR LCD V1.2
Select "Exit" and then "Yes" to save your new kernel configuration.
Execute the following commands on your host PC, the Kernel image will be created in "s3c-linux-
2.6.21/arch/arm/boot/" directory by the name of "zImage".
[root@localhost s3c-linux-2.6.21]# make
Copy "zImage" manually to "/tftpboot" directory after compilation by executing following command shown
below:
[root@localhost s3c-linux-2.6.21]# cp ./arch/arm/boot/zImage /tftpboot/
FIGURE - Advanced low level driver options
FIGURE - Saving New Kernel Configuration
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.
12