iHealth PO3M Operation Manual page 10

When setting up your user account, you will also have access to a free, secure iHealth
Cloud account. Go to www.ihealthlabs.com, then click "Sign In" to access your cloud
account from PC or Mac.
Turn Bluetooth "On"
Turn Bluetooth "On" under the "Settings" menu of your iOS device (The date and time of
the Pulse Oximeter will be synced with your iOS device upon first successful
connection). Once your Bluetooth is on, the Pulse Oximeter will connect automatically
when the app is launched and the Bluetooth indicator on the screen of oximeter will
turn on.
TESTING INSTRUCTIONS
1.Open the clamp of the Pulse Oximeter PO3M, then place the
middle, ring or index finger of your left hand into the rubber
opening of the oximeter with nail side down, as pictured.
2. On the front panel, press the "Start" button once to turn the
oximeter on.
3. Keep your hand still for the reading.
Note: If the pulse signal is too weak to measure, dashes (- - -) will appear on the
display.
4. After a few seconds, your SpO2 reading will appear on the oximeter display screen
and the app if the app is turned on.
5. If the signal strength is too low, switch to another finger and perform the test again.
6. Remove the oximeter from the finger. The oximeter will automatically turn off after 8
seconds.
8